Upgraded load area light?

[gt_addict]

I'll try and get a pic for you mate soon as.

Nice one cheers.

[jolly olly]

Gt pm me an email address as photo bucket is not playing ball at the min for the photos.

[Adam_84]

Taken during the day but its plenty bright enough at night time

[gt_addict]

Nice

Did 5m do the whole lot?

[Adam_84]

Yep

[TIMO]

Yep

Whats in the bottles

[jolly olly]

Managed to get photo bucket to play ball.
This one is about 400mm long

This one is 1200mm i also have another 1200mm over the side door, all wired independently.

[gt_addict]

Lovely stuff guys, thanks for all the replies. I think I'll wire mine up with a switch so it doesn't come on with the existing light unless I need it.

[Adam_84]

In the bottles I have...... Drum roll please

All purpose cleaners, glass cleaner, traffic film remover, cherry fresh, snow foam, tyre shine and that's all I can remember lol

[Adam_84]

And a de-greaser.

[gt_addict]

Ok guys I can't decided whether to have it wired straight to the existing lighter use the 12v behind the ply and put a switch in it so its only if I need it on.

[Adam_84]

LEDs hardly pull any current I'm lead to believe so I just wired it into my existing light which had led festoon bulbs in it and you can always use the interior light switch to turn them off and after a while they do turn off on the their own.

[gt_addict]

I suppose it does save farting about with a switch. Do you still have your festoons come on aswell or do you just cut the wires and use it for the LEDs?

[theredcaddy]

In the bottles I have...... Drum roll please

All purpose cleaners, glass cleaner, traffic film remover, cherry fresh, snow foam, tyre shine and that's all I can remember lol

That looks really smart Adam.. Do you have a link to the LED strip you used please? - - - -


Also, I see that you have a DI vessel in your van.. do you use a DI rinse for car valeting? I use RO/DI water to rinse my van and car too!

[Adam_84]

Hi, cheers for your comment, yeah I use it for car valeting but its only a part time thing still as I still work full time building mini's.
And all I did was cut the interior light cable chock block it then rejoin it to the light and put in the feed for the LEDs as well,

Here's a link for the them got it off eBay : item no. https://www.ebay.co.uk/itm/261034886382