What did you do to your connect today?

[connect_4]

I fitted a bulkhead (plywood) today, i made it myself and firstly covered it in 12mm thick underlay matting for sound deadening and then covered it in black acoustic carpet.



I set the bulkhead back to allow the seats to recline and also to give me a little storage space behind the seats.... I covered the exposed floor with the same underlay and acoustic carpet....



(just got to trim the acoustic carpet once the glue has dried).

I also took out the headlining and painted it black to match the acoustic carpet....



The A pillar covers were painted black aswell...



Door cards are next on my list to do, get them covered.

cheers

Andy

[coop.83]

Hi mate did you make the bulk head yourself or buy it?

[Kent Discos]

connect 4... come and do mine

[Mylee]

Had it slammed

[SteveO]

Had it slammed

Pics?

[Kent Discos]

mylee post it up!!!

and still owe you that £5! :haha:

[Mylee]

I'll do some pictures. This is very much work in progress at the moment. Vale fitted the springs that were custom made. Perfect fit on the connect legs and top mounts. The rear was set on the middle setting and is low. Slightly arse down if anything, but it is being left to see if the springs settle. If not, I'll raise it on the adjusters.

[valetech]

It looked sweeeeeet Yesterday going round that roundabout.

Front springs work really well

[Mylee]

It looked sweeeeeet Yesterday going round that roundabout.

Front springs work really well

Cheers mate, thanks for all your hard work yesterday. And your Dad for the coffee's

[Kent Discos]

ahh get em' up! need to see this !

[mmppeettee]

today i´ve installed a Pioneer SPH-DA01 (AppRadio) and I looove it!

[valetech]

does that unit work with the steering wheel controls?

[keirv6]

I fitted a bulkhead (plywood) today, i made it myself and firstly covered it in 12mm thick underlay matting for sound deadening and then covered it in black acoustic carpet.



I set the bulkhead back to allow the seats to recline and also to give me a little storage space behind the seats.... I covered the exposed floor with the same underlay and acoustic carpet....



(just got to trim the acoustic carpet once the glue has dried).

I also took out the headlining and painted it black to match the acoustic carpet....



The A pillar covers were painted black aswell...



Door cards are next on my list to do, get them covered.

cheers

Andy

Hi mate what did you use to paint your head lining cheers

[connect_4]

Headlining was painted with fabric paint, check out ebay, heres an example ebay number https://www.ebay.co.uk/itm/120693309045,

Cheers

Andy

[mmppeettee]

does that unit work with the steering wheel controls?

Jepp;) you just have 'program' the unit... 4 minute job