Peeps with electric windows(I NEED HELP)

[van mann]

I purchased an electric window conversion kit off ebay.Genuine ford .Motors,regulators,door cards,switches and loom.Have plugged it all in ,put the fuse in 55 but don,t work.Have checked haynes and the wiring diagram says it has a 1 touch relay in the door.I have a big green 4 pin plug for a relay in the door loom but no relay was supplied.
Does anyone know or can they check theres to see if they have a relay in the door loom.Please..

[Brains_transit]

On the big transit the relay is on the door and can be bypassed. When you pull the fuse can you see 2 pins for the fuse or just one.

[GKandR4CH]

Try the Escort MK6 window relay.

[van mann]

i know where to get hold of a relay,just not sure if it has one thats why i need someone to check theres and tell me either way.
This is the relay plug in the drivers door,


As for the above question.The 55 fuse is 2 pin.

[electric]

You should be able to link out terminals 3 & 5 to test the windows. If you get a second hand relay make sure it's off a later ford as the earlier relays had a different terminal lay out Just make sure the terminals on the relay are numbered 1 2 3 4 5 and match the position on the plug.

[van mann]

So are we sure that it has a relay in the door.In the haynes diagram ,it say 1 touch relay but i don,t think it has 1 touch closure.Can someone have a look in there door to make sure.

[valetech]

I'm 99% sure there is a relay in my door.have had my cards off to remove my Windows.
Mine are 1 touch open but not close

[van mann]

I'm 99% sure there is a relay in my door.have had my cards off to remove my Windows.
Mine are 1 touch open but not close

If you could double check for me that would be a GREAT help.
After some more wiring investigation i have found the problem and shouldl be usefull to anyone doing the same conversion.
First of all it,s not a simple plug and play.I have found that the live feed from the fusebox to the windows is pin 9 on the screw in loom plug.My loom plug in the A post HAS NO pin 9 ,so no live going to door.
I put a 12v feed through this plug and then bridged 3&5 on the green relay plug and hay presto it works.So i now need to get a live from the ignition to both PIN 9,s in driver and passanger doors.As there is no number 9 pin i need to source another piece of loom with pin attatched.
Not easy but i,m desperate to have electric windows using ford stuff.

[westers]

does that help at all mate? thats whats behind the drivers door on my LX

[van mann]

Doesn,t show a green plug.Think it,s behind the membrane.

[GKandR4CH]

http://www.ebay.co.uk/itm/Ford-Escort-M ... 2eb7f7bfc7

looks the same. I am going to be fitting 1 touch open and close to all windows so will keep you informed.