Transit Connect flasher unit.

[connectwill]

Hi folks, picked up my Connect today and on the way home discovered that the indicators were not flashing, just lighting up. except when the hazards are on. Checked out the forum and found an answer. Problem is I dont know how to get the wiring connector out of the relay unit. Any advice would be appreciated.
Regards

[connectwill]

I thought that someone would have been able to help me here. I may not have worded the question very well.
I have accessed the relay, but I dont know how to get it apart from the wiring block which goes into it. The catch on the side is split and I am afraid to pull it apart in case i ruin it completely, or do I just pull it away from the body of the relay like a latch?
Pleeeeeeeeeeeease help.

[Drizz]

Where abouts is it located fella?
Mines gone too and ive not looked yet. Any ideas on Part Numbers?

[paul2012]

Relay is located in steering column & has a 5 wire plug on it.

Wiring plug should just unclip (push clip & pull plug from relay)

[Drizz]

Thank you very much!