liteace wrote:
Connects use a calibration file when adapting\removing the speed limiter, you will have to re- do the cluster to ecu once done, you will need both keys to reprogram as well, when you choose speed limiter off it will come up with a message about a configuration file needed.
iank10 wrote:Hi Paul
Just been out to give it ago it read the vans information so then i clicked on toolbox & then module programming - click on tick mark the it said selection not availble can you tell me what im doing wrong please
paul2012 wrote:iank10 wrote:Hi Paul
Just been out to give it ago it read the vans information so then i clicked on toolbox & then module programming - click on tick mark the it said selection not availble can you tell me what im doing wrong please
You not doing anything wrong, it's the IDS software supplied with your VCMII
iank10 wrote:paul2012 wrote:iank10 wrote:Hi Paul
Just been out to give it ago it read the vans information so then i clicked on toolbox & then module programming - click on tick mark the it said selection not availble can you tell me what im doing wrong please
You not doing anything wrong, it's the IDS software supplied with your VCMII
this is what it said it could do. are they false advertising?
ford vcm ii Features:
1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.
2. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).
3. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.
4. The VCM II will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.
It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
5. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.
6. The CFR replaces the Vehicle Data Recorder (VDR).
7. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing
Ford vcm II Function: (Most of these function only New Ford VCM II has, while old version Ford VCM does not have most of these functions)
* Automatic vehicle recognition
* Read & Clear Diagnostic Trouble Codes (DTCs)
* Live Data-stream with Recording & Playback Functions for Main ECUs
* Guided Fault Finding
* New Software Re-flash for Existing ECUs
* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
* Program New Keys
* Injector Coding
* Set, Adjust or Remove Speed Governors
* DPF Regeneration
* Brake Bleeding
* Steering Angle Resets
* All Other Dealer Functions
iank10 wrote:did a google search and bought it from here.
http://www.obd2tool.co.uk/wholesale/bes ... -tool.html
iank10 wrote:hi paul
replied to your message can you confirm you received message as it remaims in the outbox
Users browsing this forum: No registered users
This site contains affiliate links for which we may be compensated.