The last couple of weeks, my 2010 Connect has been playing up when starting.
When cold, I turn the key round to II, until the glow light goes out, then start her up. That all worked OK.
But when hot, if I turned the key all the way to III in one go, all the dash lights would go out and no start.
Yesterday, after a frost, I did the normal cold start procedure, but when I turned the key to III, all I got was a click.
Now I don't get anything, even with a second battery attached.
Playing around yesterday, I found if I wiggle the key in the ignition, the dash lights flicker and can go out. Could it be that III no longer connects properly ?
Anyone had to replace the ignition switch contacts ? The contacts are cheap as, so I've ordered one from ebay, just to eliminate it.