Have you tried asking ford? I always start there. It looks like you may not even need o rings. The looks of the leak off system seems to suggest that they MAY be self sealing...
I have never needed to look at mine, so not 100% sure. Try asking ford. They will tell you if such a part exists for your engine, or if indeed they are self sealing. If so you will possibly need to replace the whole run off system, which is not expensive - aftermarket wise. I could be completely wrong. I used to drive a 2011 connect for work, and this DID have these o rings because one had split and was spewing fuel out. Just my tuppence worth. Good luck mate