Fuse box wiring question

[Alaleuile]

Hi,

I'm a little bit confused about how to connect my fuse box to my leisure battery. I have an 8-way blade fuse box (like this one: http://www.autoelectricsupplies.co.uk/p ... ategory/63), so it has 8 input terminals and 8 output terminals. Does anyone know the best way to connect the single positive feed from the battery to the 8 input terminals on the fuse box? Is there something I can buy that will join the input terminals together (a busbar or something), or do I need to somehow split the input wire into 8?!

Or have I bought the wrong kind of fuse box...?

[TIMO]

I,d just make my own buzbar mate .

[ake]

Buy decent sized spade terminals (yellow insulation) and loop the cable from one to the next using some 2.5mm cable, or put one spade on each with a short length of cable, and then join all the cables in a decent connector block, or with a nice soldered connection

[suffolkboi]

I just soldered a lenght of heavy wire across the terminals.

[Alaleuile]

Thanks for all the advice, guys - problem solved...