*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


Fitting grill tray

Post here camper and camper conversion related stuff!

Moderator: Luke

Fitting grill tray

Postby chasnjess » Fri Feb 15, 2013 10:37 am

Hi I am about to fit grill tray but not sure about the position and layout. So a few questions Firstly I have an old spinflo mk10 hob and sink.
Does the tray extend behind the hob and by how much I.E does it sit parallel to the grill knobs which leaves a gap of about 2-3inches of open space at the back of hob unit.
Where does the gas pipe enter to connect and does the base of grill tray sit on some sort of supporting ledge and would i have a metal layer on this ledge.Any help please as I am struggling with this bit .By the way it will be connected by a gas fitter ....................BRUCE
chasnjess
Transit Aficionado
Transit Aficionado
 
Posts: 104
Joined: Tue Sep 25, 2012 10:43 pm

Re: Fitting grill tray

Postby snakey » Thu Feb 21, 2013 8:47 pm

Hi Bruce,
Have a look at the SBMCC site. (Self Build Motor Caravan Club). Brilliant for info and help. Someone should be able to advise you.
Cheers Ian
snakey
Transit Addict
Transit Addict
 
Posts: 73
Joined: Thu Nov 06, 2008 2:46 pm
Location: Wirral


Return to Camper vans and conversions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.