this is how i got the van
side windows tinted
rear wall moved out and moved back to accommodate the bed and fridge while giving me a toilet room and a storage space at the back .
kitchen unit been made , got the unit from a vw t25
grill lined in Ali
Fiamma water tank to be mounted under the van
Starting to make the bed the 1st time
Fridge vents cut and fitted
made a start on the cupboards and the tarting up on the inside , wasnt keen on veltrim over everything so opted for t&g over some of the areas , its only 5mm thick ish so nice and light .
Decided against a zig unit and would make my own distribution panel and fuse box set up .
switch for split charge relay , will have a light instead of a switch as wired up to the alternator charge light wire , Will also have a switch for the fridge to be turned on in the cab .
the relay
Bed extension as was not long enough , now is 6ft 1
The gas has been started too , a manifold added , through the cupboard wall is the gas box , which has a drop out vent in , will be finishing the box over the weekend once i have got the clasps to hold the lid down .
matt
best of all you have used parts salvaged from a T25 
1st 3 coats watered down emulsion , then another 3 or not watered down and then the rest being an acrylic top coat . No pics taken yet but is a blue like the same as the van in an eggshell . 
