Skylight

[Rescue_marshal]

Sorry if this is the wrong area to post.
Recently bought a hitop mk6. Was thinking of fitting a skylight to add more light. But then noticed the roof is 'ribed'. Is it still possible to fit one?? How to get around the problem?

[john240758]

i have fitted one to my mk6 fibre glassed around outside on roof to stop leaks

[seaside]

I've put a skylight in my ribbed highroof Mk6.
Used a good flexible gunned adhesive, build up the small depressions first to give a flat bed all round... I used the adhesive and some thin off cuts from some PVC window trims
The important thing in my mind is to let the adhesive/sealant go off first while not fully tightening down the skylight , and then after it's set, tighten it down further, so as to squash the seal, like you would tighten a kichen sink or bath waste rubber washer.

[Rescue_marshal]

Cheers both. Something to keep in mind in the not so distant future. What about depth of skylight??

[Kedishen]

fiamma and similar makes have an extra depth fitment sold as an extra so should be no problem.

[Rescue_marshal]

Thanks people. Camper coming along nicely. Well apart from the new 'unit' to fit inside. Replacing the 2x1 home made job with a custom made unit. City link lost it. An now they'd have gone pop. . Thankfully hun who made it is going to make another one free of charge.