*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
Elevating roof bed hinge
Moderator: Luke
3 posts
• Page 1 of 1
Elevating roof bed hinge
by kazoo_u » Thu Sep 06, 2018 9:08 pm
I'm fitting my SCA 126 elevating roof into my transit custom lwb this weekend. I've just realised the fitting instructions don't include anything on fitting the bed board. Has anyone fitted one before or if you have a sca roof with a hinged bed that lifts up could you put a photo or two of the hinges up. Thanks in advance.
Mk7 T260 swb 85ps camper self build. Roofrack with inset solar panel, Vantuner enabled cruise control.
- kazoo_u
- Transit Addict
- Posts: 75
- Joined: Mon Sep 14, 2015 1:09 pm
Re: Elevating roof bed hinge
by kazoo_u » Sun Sep 09, 2018 6:02 pm
Here's what I've got to fit the bed to but there's no way you can get a screw driver to screw into the end of the bed board. The hinges are too low to screw into the top and too high to screw into the bottom of the bed board? Will try contacting Banwy to see if there is something missing.
You do not have the required permissions to view the files attached to this post.
Mk7 T260 swb 85ps camper self build. Roofrack with inset solar panel, Vantuner enabled cruise control.
- kazoo_u
- Transit Addict
- Posts: 75
- Joined: Mon Sep 14, 2015 1:09 pm
Re: Elevating roof bed hinge
by kazoo_u » Tue Sep 11, 2018 1:32 pm
Put the roof on over the weekend and with the bed in position I could figure it out, the screws come down from the top into the end of the bed platform, had to drill pilot holes first.
You do not have the required permissions to view the files attached to this post.
Mk7 T260 swb 85ps camper self build. Roofrack with inset solar panel, Vantuner enabled cruise control.
- kazoo_u
- Transit Addict
- Posts: 75
- Joined: Mon Sep 14, 2015 1:09 pm
3 posts
• Page 1 of 1
Return to Camper vans and conversions
Who is online
Users browsing this forum: No registered users