Hi all, my luton body is in a bit of a mess, and so hard to fix lately as it never stops raining, and rain is forecast for the next week as well
So, I have 2 urgent problems with my luton GRP body, one is a bit of hole in the top left corner.
IMG_20200102_121002337_HDR by Mike Van, on Flickr
IMG_20200102_121016423_HDR by Mike Van, on Flickr
The inside
IMG_20200102_121057919_HDR by Mike Van, on Flickr
The van overall isn't that bad looking, just the left side! So bear in mind the wooden bit inside the plastic outer/inner is getting wetter and wetter how can I mend this? Guess for a start I could cover it up to stop rain, but then I would need to dry it out before mending, or is there some way of just fixing a small plastic covering over it, using rivets or drilling holes and just bolting a piece of plastic on?
Next urgent problem is a leak inside van from the roof, on both front left and right sides, I've tried to fix with fibre glass about 5 times but always starts leaking again. The problem came with the van, the stupid previous owners tried to fix with tar, making the roof sink and collect water! So now I'm thinking to cut away this front piece altogether and replace with another sheet of clear plastic, and bolt down, after drilling holes, or using existing holes? Any pointers please?
IMG_20200102_121119903_HDR by Mike Van, on Flickr
IMG_20200102_121126665_HDR by Mike Van, on Flickr