*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


interchangeable parts with the MK1 or 2 transit

Ford A-series 1974 - 1982

Moderator: Luke

interchangeable parts with the MK1 or 2 transit

Postby sven » Tue Jun 09, 2009 10:46 pm

will post parts we find which is interchangeable here

to get started:

timingbelt and waterpump for the 3,5 yorkengine are the same as for the 2.4 York found in a series and transit
Last edited by sven on Mon Jun 15, 2009 7:38 pm, edited 1 time in total.
sven
Transit Aficionado
Transit Aficionado
 
Posts: 114
Joined: Sun Sep 14, 2008 12:25 pm
Location: Sarpsborg, Norway

Re: interchangeable parts with the MK1 or 2 transit

Postby FredTransit » Wed Jun 10, 2009 10:51 am

Dash (Mk1 and Mk2) transit
Doors (Mk1 and Mk2)
Windscreen
Wheels are the same as Dodge 50
A Transit is for life, not just for Christmas. http://www.a2ecommercials.webs.com
My galleries - http://a2ecommercials.webs.com/apps/photos/
User avatar
FredTransit
Mk2 Trannyist
 
Posts: 17470
Joined: Fri Mar 11, 2005 4:34 am
Location: London

Re: interchangeable parts with the MK1 or 2 transit

Postby A0614 » Sun Mar 11, 2012 12:16 am

The old diesel alternator can be substituted with a Bosch 90amp from a 2.9 Scorpio.
This will fit straight in with just a slight modification of the pulley offset to the rear by removing/replacing some washers.
Now you will have about 30 amps charging at idle!
A0614
Newbie
 
Posts: 8
Joined: Sat Sep 26, 2009 4:46 pm
Location: Stockholm Sweden

Re: interchangeable parts with the MK1 or 2 transit

Postby Clarkb4u » Mon Jun 04, 2012 12:55 pm

Does the A series have the same king pins etc as the dodge 50?
Getting king pin kits for the A series is a nightmare, any help would be appreciated
Clarkb4u
Newbie
 
Posts: 4
Joined: Mon Jun 04, 2012 12:51 pm

Re: interchangeable parts with the MK1 or 2 transit

Postby Sundowner » Wed Jul 11, 2012 1:08 pm

Aussie Mk2 have the same firewall/engine cover
Yeah i know its big green and rusty so move your Porsche before i bash it with 460 cubes of fords finest cast iron
User avatar
Sundowner
Transit Devotee
Transit Devotee
 
Posts: 693
Joined: Mon Jun 27, 2005 11:01 pm

Re: interchangeable parts with the MK1 or 2 transit

Postby big gux » Thu Dec 06, 2012 12:28 am

i can supply and fit new king pins for any ford a series just give me ya axle beam and i will press ya old ones out and new ones in and i can also do you exchange units as long as your old units have not been beat too death by a diy artist with a big lump hammer :(
User avatar
big gux
Transit Addict
Transit Addict
 
Posts: 62
Joined: Wed Oct 10, 2012 7:47 pm
Location: leicester

Re: interchangeable parts with the MK1 or 2 transit

Postby Louisr » Wed Jan 16, 2019 11:03 pm

big gux wrote:i can supply and fit new king pins for any ford a series just give me ya axle beam and i will press ya old ones out and new ones in and i can also do you exchange units as long as your old units have not been beat too death by a diy artist with a big lump hammer :(


Bit of a long shot..Are you still around big gux and can you still supply kingpins?
Louisr
Newbie
 
Posts: 2
Joined: Wed Jan 16, 2019 10:32 pm


Return to Ford A-Series



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.