what tools can you lend to the project?

[whitemice]

Illustration airbrushes/general airbrushes/airbrush compressor,reservoir/usual various engineering sockets, tools etc.

[AlanN]

Some great donatiions, V8, alloys, wish I could offer more

[troppo]

Well i am honestly sorry to say all i can donate is my support and best wishes.
Dare say i`ll have a social ale or two for the decent blokes helping out and donating to this great cause!
Good onya guys, bloody great idea!!!!!

[TIMO]

oh ,,, i got a mate at granlyn autopaints west brom,,,im gonna get him to have a word with the boss to see if they ll donate some trick paints for the project...not promising anythin mind but well worth a try me thinks....once a colour schemes been decided ill get on the case

[peter1975]

I can supply swear box
raise a bit more cash
i have a chest full of all sockets spanners etc etc that i wiil gladly bring you never know may have some odd size tool you may need bloody land rovers

[snap-on]

I have 5 ltrs of this purple metallic basecoat you can have for the van

[whitemice]

I have 5 ltrs of this purple metallic basecoat you can have for the van

That would be cool esp. with a bit of added black..

[TIMO]

that would look sweet m8 itll save me a begging mission too

[whitemice]

that would look sweet m8 itll save me a begging mission too

Need some white and red and black bor', get thee cap int' hand.

[Beefy]

where is this work happening? i know the date is a while away, but just found the postings and was getting excited......
what engine is it?
i have a small m/c shop and folding machines (sheet metal stuff) so any bits that cant be found i could help rebuild/repair.
although its not portable, i has a TIG welder and can weld ally too.

just an idea being thrown into the pot....
will the van be at mania for ideas and deligation of jobs?
beef

[Beefy]

i also forgot, once the party is over i can also supply plenty of mead and if the party is big enough i could bring the beer pumps to celebrate!

[Luke]

where is this work happening?

we currently have a provisional offer of a unit in Ipswich - but we do need more available units incase the offer falls through aslo it would be great to have a few offers then we could pick the most central location personally i dont mind where ever it is i'll be there for the full weekend camping out

will the van be at mania for ideas and deligation of jobs?

unfortunatly i've got my caravan on tow otherwise i could have brought it down on the A-frame ......... so NO but we can have a chat at TM over a few beers thats when all the best ideas come out
what i will do is go over to the van (it's at my mates) and take a few hunderd close up photos of all the areas and post em up to give everyone involved a very good idea of whats needed (it'll have to be when i get back from TM) - i can even rip out the ply lining so no suprises there

[psv-hgv-flt]

where is this work happening?

we currently have a provisional offer of a unit in Ipswich - but we do need more available units incase the offer falls through aslo it would be great to have a few offers then we could pick the most central location personally i dont mind where ever it is i'll be there for the full weekend camping out

will the van be at mania for ideas and deligation of jobs?

unfortunatly i've got my caravan on tow otherwise i could have brought it down on the A-frame ......... so NO but we can have a chat at TM over a few beers thats when all the best ideas come out
what i will do is go over to the van (it's at my mates) and take a few hunderd close up photos of all the areas and post em up to give everyone involved a very good idea of whats needed (it'll have to be when i get back from TM) - i can even rip out the ply lining so no suprises there

lincoln. (me)..??

[jay]

just seen this and as i am coming next year with my van it will have onboard A 1.5tonne engine crane if you need it 1/2 drive socket set and 3 foot long breaker bar and air buzz gun and a 1/4inch air line which is about 50feet long 2kva generator petrol(someone will need the petrol for it but its there if needed)A couple of tarporlings in case it rains(unless someone has a gazibo) also bring a set of spanners standard length and short ones and set of screwdrivers..
And I am not making any tea as cant make tea for myself let alone anyone else.. btw got a small compressor in the van which we can use if needed

[mealic]

Thought I would now make this an official offer after speaking with Luke and others at mania.I have a Mk4 on an `L 150 swb custom that I will offer as another donor vehicle.Would be good to measure and make patterns and strip and clean bits whilst others were being dismantled.

I also know a commercial breaker ,if we knew what we needed before-hand I would bring it up.

I have pretty good knowledge of mechanics and a comprehensive set of tools including sockets and spanners,ramps and stands,grinders and cutters -mains and cordless.Electrical and woodworking tools.A portable compressor and tools.WHY.

Looking forward to it!!

Alastair-MEALIC (Silver Petrol/LPG at Mania)