Moderator: Luke
transitgeoff wrote::xlightweights
maybe that will teach you not to do such a mammoth project so far away from nearly everyone
Luke wrote:transitgeoff wrote: not to do such a mammoth project so far away from nearly everyone
transitgeoff wrote:what did you really expect
transitgeoff wrote::) any good sculpters on here![]()
we are gonna need them
this vans a battered example before weve started cutting it and stitching it back together
we are going to need a few tins of filler (easy 1
) loads of 40 and 80 grit for the long bed sanders or abranet and long blocks, da pads, and i dont/havent used it often but i think it will be necessary, spray filler ! then a good 5 litres of 2k primer ( i will supply that, i have a supplier that has one thats like thick custard and dosent sink too bad !) then i dont think wet flat, i think da the primer with fine da pads ready for paint ( unless anyone thinks different
its a time thing
) then you need to decide on the colour or colours, inside the shuts etc, we will need a fair bit of paint, also what system ?? clear over base or straight 2k cryl
if we go clear over base i have a good supplier for laquer
better start talking
Luke wrote:transitgeoff wrote:what did you really expect
well not this![]()
transitgeoff wrote::) any good sculpters on here![]()
we are gonna need them
this vans a battered example before weve started cutting it and stitching it back together
we are going to need a few tins of filler (easy 1
) loads of 40 and 80 grit for the long bed sanders or abranet and long blocks, da pads, and i dont/havent used it often but i think it will be necessary, spray filler ! then a good 5 litres of 2k primer ( i will supply that, i have a supplier that has one thats like thick custard and dosent sink too bad !) then i dont think wet flat, i think da the primer with fine da pads ready for paint ( unless anyone thinks different
its a time thing
) then you need to decide on the colour or colours, inside the shuts etc, we will need a fair bit of paint, also what system ?? clear over base or straight 2k cryl
if we go clear over base i have a good supplier for laquer
better start talking
Luke wrote:gutted![]()
honestly i wish we'd never started this
note thetransitgeoff wrote:[well when your sending me pm"s like this what am i to think![]()
![]()
Luke wrote:gutted![]()
honestly i wish we'd never started this
pat stevens wrote:i would bbe leaving the colour choice till last minute to see how body comes out
can probably get a day next week if anyones doing anything thru the week let me know as i finally cured transport prob picking 4x4 up this weekend comming
totally pissed off with not been able to get about
peter1975 wrote:CAN i say i am relly sorry i did not make it . as i was on the way there on friday going up A 42 got side swiped by a hgv![]()
got broken leg and two cracked ribs
![]()
![]()
car is a write off and it it had the granda seats in it but fook knows were car is at mo only just got out of hospital
![]()
please except my apoliges
i would have loved to have been there
regards peter
GPM01 wrote:peter1975 wrote:CAN i say i am relly sorry i did not make it . as i was on the way there on friday going up A 42 got side swiped by a hgv![]()
got broken leg and two cracked ribs
![]()
![]()
car is a write off and it it had the granda seats in it but fook knows were car is at mo only just got out of hospital
![]()
please except my apoliges
i would have loved to have been there
regards peter
Holy crapola Pete, that's bad news mate.....No need for apologies mate, nothing you could have done about that![]()
![]()
Hope you recover soon fella....
Return to Weekend makeover - Forum charity project!
Users browsing this forum: No registered users
This site contains affiliate links for which we may be compensated.