Transitmania 12 @Santa Pod 15th to 17th May 2020


head bolt torque settings

The all new 2013 Transit Mk8 Forum. Transits 2013+

head bolt torque settings

Postby polker8 » Thu Jun 25, 2020 10:20 pm

Hello, would anyone know the correct torque setting for the head bolts on a 2.0 eco blue engine? Also the camshaft carrier and injectors?What a job to get this engine apart!,
polker8
Transit Fan
Transit Fan
 
Posts: 10
Joined: Fri Jul 28, 2017 9:45 pm

Re: head bolt torque settings

Postby p2thed » Mon Jun 29, 2020 5:31 am

Head bolts are.
Stage 1 20nm
Stage 2 40nm
Stage 3 90 degrees
Stage 4 90 degrees again
Stage 5 90 degrees a final time.
p2thed
Transit Aficionado
Transit Aficionado
 
Posts: 163
Joined: Sat Jul 03, 2010 6:10 pm

Re: head bolt torque settings

Postby polker8 » Tue Jun 30, 2020 8:31 pm

Thank you, That might explain why I could not get them undone, the ribe bit kept slipping out as they are such a shallow head, I resorted to drilling the heads off to get them out, might have to try harder putting it back together again,, plus i need a new set of injectors! good old ford
polker8
Transit Fan
Transit Fan
 
Posts: 10
Joined: Fri Jul 28, 2017 9:45 pm


Return to Mk8 Fourth Generation Transits



Who is online

Users browsing this forum: No registered users

croncroncron