by metalworker0 » Wed Apr 23, 2025 4:23 pm
Pure guess work this ...as the parts diagrams do not show the rack in relation to the bodywork
i think its spraying the leak somewhere in the vicinity of where the column joins onto it ..and the oil is coming through as a small stream through the aperture the column passes through in the bulkhead
what you have to do ...is put it over ramp, over pit or on axle stands ...clean the spilt oil with a solvent ...paraffin jizzer ..diesel, or cans of brake cleaner etc
Then get someone to turn the steering with engine running, so that you can find observe where the oil is leaking from .
May be a pipe union that needs tightening
it may be a seal
you will not find out until you've performed the above ..
ive searched on ebay ..and cannot find ..seals , overhaul kit or anything approaching a maintenance item other than boot gators or track rods, so any leak that isnt coming from a pipe ....it will be a new rack.
if by shear chance that its same rack as mk6 or 7 ..there are seal kits for them
all the best.mark