Transitmania 10 @Santa Pod 18th to 20th May 2018


P2463, P246C Fault Codes And Limp Mode?

The all new 2013 Transit Mk8 Forum. Transits 2013+

P2463, P246C Fault Codes And Limp Mode?

Postby Inked » Sun Aug 12, 2018 11:08 pm

Hi guys

I'm trying to fix a 2015 transit (engine code: CYR5) that has error codes P246C and P246C and is in limp mode.

I've tried doing a forced regen but for some strange reason none of my software gives me the option for this vehicle (it does for every other vehicle I've needed to regen).

I can clear the fault codes but they come straight back even without the engine being run.

Also if I do clear the fault codes while driving I get the full power back (comes out of limp mode) but this only lasts until the revs settle then it goes back into limp mode.

Any ideas ?
Inked
Newbie
 
Posts: 4
Joined: Sun Aug 12, 2018 7:14 pm

Re: P2463, P246C Fault Codes And Limp Mode?

Postby Inked » Mon Aug 13, 2018 1:16 am

I'm guessing this is more of an electrical fault rather than actually a blocked dpf filter as the fault comes back even before I start the engine so the ECU wouldn't know the dpf was blocked
Inked
Newbie
 
Posts: 4
Joined: Sun Aug 12, 2018 7:14 pm

Re: P2463, P246C Fault Codes And Limp Mode?

Postby Altransit » Tue Aug 14, 2018 8:20 pm

:idea: Maybe one of the DPF sensors, or the wiring to the sensors :?
1997 Mk5 SWB 115 Minibus 70ps Di (Gone, but not forgotten!)
2004 Mk6 SWB T280 Medium Roof 85PS 2.0 TDDi - Vantunered (Also gone)
2008 Mk7 SWB T280 Medium Roof 85PS 2.2 TDCi - Also Vantunered
User avatar
Altransit
Site Moderator
 
Posts: 31605
Joined: Tue Oct 17, 2006 12:23 am
Location: Bicester, Oxfordshire, UK


Return to Mk8 Fourth Generation Transits



Who is online

Users browsing this forum: No registered users