Hello,
Is there anyway of turning off the Dipped Beam Error on my dashboard.
I have installed LED lights and put on a Resistor but it still says Dipped Beam Error.
Someone said use a Decoder or a Diagnostic Machine?
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
Dipped Beam Error
5 posts
• Page 1 of 1
Dipped Beam Error
by Ashley S » Sat Oct 02, 2021 12:10 pm
- Ashley S
- Transit Addict
- Posts: 58
- Joined: Mon Oct 01, 2018 6:01 pm
Re: Dipped Beam Error
by hughesyn » Mon Oct 04, 2021 1:25 pm
I can't help with turning it off.
However, it sounds odd.
I'm running all LEDs with no resistors. No errors.
However, it sounds odd.
I'm running all LEDs with no resistors. No errors.
2023 Mk8 DCIV 170 auto L3H2
- hughesyn
- Transit Aficionado
- Posts: 215
- Joined: Wed Dec 20, 2017 7:47 pm
Re: Dipped Beam Error
by Ashley S » Mon Oct 04, 2021 5:51 pm
hughesyn wrote:I can't help with turning it off.
However, it sounds odd.
I'm running all LEDs with no resistors. No errors.
What H7 LED you using mate? Thanks.
- Ashley S
- Transit Addict
- Posts: 58
- Joined: Mon Oct 01, 2018 6:01 pm
Re: Dipped Beam Error
by mcbutler » Fri Oct 15, 2021 11:00 pm
If you fitted cheap chinese leds you may have a slight voltage difference between the pair, this will cause a permanent error. Good quality LEDs are expensive and should always come ballasted so as not to trigger any canbus errors.
2014 Mk 8 Jumbo 350 2.2 RWD single rear wheels
- mcbutler
- Transit Aficionado
- Posts: 143
- Joined: Tue Sep 15, 2020 8:06 pm
5 posts
• Page 1 of 1
Return to Mk8 Fourth Generation Transits
Who is online
Users browsing this forum: No registered users