I currently have a fault on my 2016 2.0 transit custom.
When accelerating up through the gearbox all seems ok up to 2000 Rpm but then pulling power drops right off above 2000 Rpm, if i keep in that gear and allow the revs to climb I eventually get the "Sevice Now" warning displayed with the Yellow "I" info light illuminated, change up to the next gear and it goes away and stays off when not labouring the engine. I don't get an Engine warning light coming on and the van does not go into limp mode.
Fault codes all point to injector electrical circuit but after testing the wiring I find no fault on the circuit for the injectors,
===PCM DTC P126C:31-68===
Code: P126C - Cylinder 3 Injector Input Circuit
===PCM DTC P126A:10-6C===
Code: P126A - Cylinder 1 Injector Input Circuit
===PCM DTC P126C:10-6C===
Code: P126C - Cylinder 3 Injector Input Circuit
===PCM DTC P126D:10-68===
Code: P126D - Cylinder 4 Injector Input Circuit
===PCM DTC P126B:10-6C===
Code: P126B - Cylinder 2 Injector Input Circuit