Power folding mirrors

[loot]

Ah I reinstated the thread for you to read lol yes it's hard wired on the mk1, apparently on the later one it is programmable as you seem to have done. But I'm not familiar on the later ones sorry.

[Nads1978]

Ah I reinstated the thread for you to read lol yes it's hard wired on the mk1, apparently on the later one it is programmable as you seem to have done. But I'm not familiar on the later ones sorry.

Thanks, I'll have a read.

Sent from my ONEPLUS A6013 using Tapatalk

[Dan T]

Doh! Sorry, it's a brand new 2020 '70' plate DCIV LWB Limited 130, I've already programmed the "auto-locking" function with FORScan Still finding my way around it.

Sent from my ONEPLUS A6013 using Tapatalk

Unless it’s a facelift tourneo you’ll need to make a loom.
The pre facelift can be done with an asbuilt edit.

I had a diagram for a loom I made for folding mirrors, but not sure where it’s gone. It’s basically a relay and capacitor with 4 wires.

[Nads1978]

Doh! Sorry, it's a brand new 2020 '70' plate DCIV LWB Limited 130, I've already programmed the "auto-locking" function with FORScan Still finding my way around it.

Sent from my ONEPLUS A6013 using Tapatalk

Unless it’s a facelift tourneo you’ll need to make a loom.
The pre facelift can be done with an asbuilt edit.

I had a diagram for a loom I made for folding mirrors, but not sure where it’s gone. It’s basically a relay and capacitor with 4 wires.

If you stumble across the diagram, please repost it.

Sent from my ONEPLUS A6013 using Tapatalk

[R8khn]

Hi, im a newbie on this forum and joined as i have just purchased a 2020 transit custom limited. I was hoping if someone could point me to what is exactly needed to make the mirrors fold in on locking the van? I am not very technical so please be gentle. Lol