HELP - Replacing Front Discs on 64 plate Custom ? Stuck ??

[bigjohnthomas]

Yeah act like you hate it
But secretly you to interfer with it

[Abbadon]

So, I have this issue... Van is 2015 plate, one side came out easy peasy, other side ffs! Can't get it to budge... Lump hammer on an ally block and still won't move. I've put nut back on backwards now, but what can I do to hit it hard without damaging anything?

Sent from my SM-G950F using Tapatalk

[Neil the cabbie]

Funnily enough my techy did my pass and discs Thursday gave me back the car with a bandage on his hand. It wasn’t there when I left the vehicle....
He didn’t make many nice things to say about doing the discs and pads!!!
To be fair the discs lasted 150,000 miles


Sent from my iPhone using Tapatalk

[seikokid]

I did mine recently, have you undone the torque bolts before hitting the drive shaft. i used a 40lb sledge and shifted it 1st hit. I think i tired with a smaller hammer it’s it wasent giving me a result

[seikokid]

So, I have this issue... Van is 2015 plate, one side came out easy peasy, other side ffs! Can't get it to budge... Lump hammer on an ally block and still won't move. I've put nut back on backwards now, but what can I do to hit it hard without damaging anything?

Sent from my SM-G950F using Tapatalk

i think i used a metal stone chisel on mine to separate it

[Abbadon]

see my other post about the outcome of my stuck driveshaft...

viewtopic.php?f=65&t=199254&c=1

But ill leave this here as a taster:

20200628_105224 by Abbadon2001, on Flickr