Transitmania 11 @Santa Pod 17th to 19th May 2019


speaker topic with a twist

The all new 2013 Transit Custom Forum. Transits and Tourneos 2013+

speaker topic with a twist

Postby M3Stig » Tue Sep 18, 2018 8:15 pm

ok guys so i know you need focus plates to have uprated speakers in, but it you were to take the backing plate off and put a bigger speaker into the door what would happen here? would the window mech catch ? - im toying with the idea of better speakers i dont mind doing a little bit of cut and shut and making my own plates etc but im curious on what options are with just removing the speaker housing off and either tec screw straight to the door or something?
Image
User avatar
M3Stig
Transit Aficionado
Transit Aficionado
 
Posts: 158
Joined: Wed Dec 17, 2008 10:16 pm
Location: Frodsham Cheshire

Re: speaker topic with a twist

Postby BHM » Tue Sep 18, 2018 10:18 pm

The grill in the door card will be the effective limit as its diameter is only about 160mm....imho going beyond 160mm will push air pressure onto the back of the card.

BHM
BHM
Transit Aficionado
Transit Aficionado
 
Posts: 130
Joined: Sat Jan 04, 2014 9:50 pm

Re: speaker topic with a twist

Postby M3Stig » Thu Sep 20, 2018 1:16 pm

even if it set back it should allow for a bigger speaker? as its futher away from the grill
Image
User avatar
M3Stig
Transit Aficionado
Transit Aficionado
 
Posts: 158
Joined: Wed Dec 17, 2008 10:16 pm
Location: Frodsham Cheshire


Return to Transit Custom



Who is online

Users browsing this forum: No registered users