HI I have 2013 transit custom Eco-Tec . It will not perform a regen and engine management light has came on and in limp mode. It is displaying the following fault codes P1708 , P2463 and P246C. I have tried carrying out a static Regen and it fails at 60%. Any ideas how I can fix this .
Cheers
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
DPF Problems
3 posts
• Page 1 of 1
DPF Problems
by chrisdainty » Tue Oct 02, 2018 3:41 pm
- chrisdainty
- Newbie
- Posts: 8
- Joined: Mon Jan 25, 2016 11:11 pm
Re: DPF Problems
by loot » Wed Oct 03, 2018 10:23 am
P1708 Clutch switch (or accelerator switch came up)
P2463 Diesel Particulate Filter Restriction - Soot Accumulation
P246C Diesel Particulate filter restriction - Forced Limited Power
Probably want to get it on live data and check the clutch, sensors and other readings out.
P2463 Diesel Particulate Filter Restriction - Soot Accumulation
P246C Diesel Particulate filter restriction - Forced Limited Power
Probably want to get it on live data and check the clutch, sensors and other readings out.
-
loot - Site Moderator
- Posts: 33484
- Joined: Sat May 05, 2012 6:06 pm
- Location: North Wales
Re: DPF Problems
by 114whytegoods » Wed Oct 10, 2018 8:22 pm
Check the fuel vaporizer and small fuel pump that feeds it
- 114whytegoods
- Newbie
- Posts: 2
- Joined: Sat Sep 01, 2018 10:41 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users