*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Transit cutting out like clockwork and not starting for a bi

The all new 2013 Transit Custom Forum. Transits and Tourneos 2013+

Transit cutting out like clockwork and not starting for a bi

Postby Domgun » Wed Aug 14, 2019 6:25 pm

Hi all I have a transit custom 2014 and has all of a sudden started cutting out and not starting unless I leave it for a bit then prime the fuel.
I have took it to a garage changed filter crankshaft sensor then he then checked the fuel line and nothing was coming through.
He checked the sender unit that was fine and then when I turned the ignition one no power to the sender unit then all of a sudden whilst he was checking power to the relay power came on he popped the relay back in and we primed the fuel and it started.
This has happened about 20 time even stopping in the same place always about 20 mins in.
He checked the codes when it was not starting and oil pressure was coming up this was a full day working on the van and was not cheap just wondering if any of you guys have had similar or any ideas what to do nex that isn't going to cost me a packet thanks in advance
Domgun
Newbie
 
Posts: 2
Joined: Tue Aug 13, 2019 6:30 am

Re: Transit cutting out like clockwork and not starting for

Postby DrDeAtH » Sat Aug 17, 2019 9:21 pm

I had similar. Replace the engine bay loom, it will be water damaged
DrDeAtH
Transit Aficionado
Transit Aficionado
 
Posts: 300
Joined: Thu Dec 30, 2010 8:19 pm
Location: Hertfordshire


Return to Transit Custom



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.