*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


2021 Custom fuse tap for DashCam

The all new 2013 Transit Custom Forum. Transits and Tourneos 2013+

2021 Custom fuse tap for DashCam

Postby CRM » Tue Dec 07, 2021 11:17 am

Without getting into the debate of dashcams, i do however need to fit one now.
Can anyone advise where to tap the power from in a 2021 van, the fuse layout is a bit different from my 2014 van and is almost inaccessible under the dash too.
Ideally a fuse that will give me a little power post key removal but not a constant live to avoid it staying on constantly.
Cheers
CRM
Transit Aficionado
Transit Aficionado
 
Posts: 102
Joined: Thu Dec 13, 2012 8:38 pm

Re: 2021 Custom fuse tap for DashCam

Postby strojix » Tue Dec 07, 2021 5:26 pm

strojix
Transit Fan
Transit Fan
 
Posts: 11
Joined: Mon Oct 24, 2016 6:50 am

Re: 2021 Custom fuse tap for DashCam

Postby J.J McDuff » Wed Dec 08, 2021 5:25 am

You considered using the cigarette lighter in the recessed top dash?

You can run the cable up inside the rubber seal of the driver's door frame, and tuck it in along the cabin roof lining.
J.J McDuff
Transit Addict
Transit Addict
 
Posts: 45
Joined: Sun Nov 15, 2020 10:26 am

Re: 2021 Custom fuse tap for DashCam

Postby dustybin » Tue Dec 14, 2021 1:08 pm

i just used the top lighter socket...only issue is with auto start/stop....the camera carrys on recording whilst sat at lights etc when the engine shuts off.only thing is when the engine resarts it seems it switches that socket off so the camera restarts every time the engine starts..i presume this is to give the starter all the power it can get...
dustybin
Newbie
 
Posts: 5
Joined: Thu Jan 09, 2020 11:34 am

Re: 2021 Custom fuse tap for DashCam

Postby CRM » Tue Dec 14, 2021 1:11 pm

Cheers all - the fag lighter socket is not really an option for the reason you mentioned if the battery is a bit weak, but also to keep wiring and clutter minimal.
The link Strojix put up was helpful thanks, not sure reading between the lines where that applies to the 2021 custom, it looks a bit involved adding pins to block connectors - i can see the fire starting from here lol
Cheers
CRM
Transit Aficionado
Transit Aficionado
 
Posts: 102
Joined: Thu Dec 13, 2012 8:38 pm

Re: 2021 Custom fuse tap for DashCam

Postby dunf » Tue Dec 14, 2021 1:27 pm

dustybin wrote:i just used the top lighter socket...only issue is with auto start/stop....the camera carrys on recording whilst sat at lights etc when the engine shuts off.only thing is when the engine resarts it seems it switches that socket off so the camera restarts every time the engine starts..i presume this is to give the starter all the power it can get...


Mine is the same but the camera has a backup battery in it, so doesn't reset when the engine restarts. My last dashcam was the same. Both by Nextbase. Do you have a different type?
User avatar
dunf
Transit Addict
Transit Addict
 
Posts: 96
Joined: Sun Aug 07, 2016 12:47 pm
Location: Fife

Re: 2021 Custom fuse tap for DashCam

Postby MrT42 » Thu Dec 16, 2021 5:38 pm

Have you seen this?

https://www.youtube.com/watch?v=KsY124qBD_Q

Not so sure its ok for a 2021 version but was good for my 2017
MrT42
Newbie
 
Posts: 8
Joined: Mon Aug 09, 2021 8:14 pm


Return to Transit Custom



Who is online

Users browsing this forum: Majestic-12 [Bot]

This site contains affiliate links for which we may be compensated.