Masses of Mk3/4/5 parts - far too much to list

[nunobarros]

Do you happen to have a crankshaft pulley that takes a 4PK and a 6PK belt?

[sportscott]

Do you have a Brake compensator load valve? I need one to put my mk5 back on the road, the lever arm on mine rotted away.

[MinorMatt]

2 port or 4 port?

I have a 4 port - but its not cheap as nobody makes them any more.

I don't have a 2 port - but they are easy to get

[sportscott]

Good question, I am not at home at the moment but when I will be need to get under and get a look, probably got the Holy grail 4 port, can a 2 port be substituted instead of the 4 as need all new brake lines any way? Only the lever arm on mine has rusted through. Just done a quick google and see the 4 port was mainly used on the 190 and twin wheel versions.

[MinorMatt]

Good question, I am not at home at the moment but when I will be need to get under and get a look, probably got the Holy grail 4 port, can a 2 port be substituted instead of the 4 as need all new brake lines any way? Only the lever arm on mine has rusted through. Just done a quick google and see the 4 port was mainly used on the 190 and twin wheel versions.

4 port was used on anything with a diagonal split braking system. If you have ABS its a 4 port one. 4 port ones are most commonly fitted to passenger carrying vehicles. Vans/Trucks (unless fitted with ABS) don't tend to have them. 4 Port are also more common in europe than the UK.

Drop me a PM when you know

If you have ABS (and wan't it to keep working) you need a 4 port otherwise you can fit* a 2 port instead, but it will require a replumbing and reconfiguration to a front/rear split on the brakes (* not taking in to account any rules or legislation where you are).

[AJCavs]

Hi, don't suppose you have a set of engine mounting brackets for a Cologne V6? Cheers.