Ford 6006 CDC six CD multi-changer SOLD

[M0YDP]

Good offer, but i was hoping it would make a little more than that... Plus there are approx 19 at the minute watching, so it may make more, and of course it may not...

I would be happy close the auction for £100 posted (that is postage included)..

Kind regards

Steve

[ChrisW6]

Hi Guys

So are we saying the matt finnish, silver knob, 6006 version only fits the Mk7, with and the older shinier black button version, only fitting the Mk6 ?

Or can I buy the silver knob version for my Mark 6 ?

as my Van has nothing at the moment but a huge sad empty space

Chris

[M0YDP]

Hi Guys

So are we saying the matt finnish, silver knob, 6006 version only fits the Mk7, with and the older shinier black button version, only fitting the Mk6 ?

Or can I buy the silver knob version for my Mark 6 ?

as my Van has nothing at the moment but a huge sad empty space

Chris

No, this unit is to big for were you need to fit the CD player into on the mk6 --> Transit, so no.. It will not fit into that huge sad empty space as you put it, if that is what you are talking about ?..

Kind Regards

Steve

[ChrisW6]

Yes - I have what I'm calling a double height hole for a CD player on my 2006 Mk6

I've seen the 6006 centred silver knob disc player in a Mk7 and the hole looks about the same - so was wondering if that fitted the 2006 Mk6 model as well.

But I'm guessing I have to use, what I'm guessing is the earlier 6006 (lesser featured version), the one with the small black knob on the left hand side.

[Brains_transit]

here it is in my mk6 after some cutting i cut the facia piece,the main dash and the 5mm off the top of the heater controls

[M0YDP]

here it is in my mk6 after some cutting i cut the facia piece,the main dash and the 5mm off the top of the heater controls

That is neat ! so it is possible that i may be wrong with the 2006 model.. I know it will not fit my mk6 transit on a 2000 X, not without major surgery that is... but that looks good that..

Regards

Steve

[ChrisW6]

And so there was a bright light and clarity in the world - lol

Very Sexy Job

I think you might be the only person with pics of this set up on a Mk6, on the entire World Wide Web !!!

What did you use to cut out the dash ? I'm guessing you only need to cut the bit hidden under the lip of the face of the stereo, being the bit that the metal box slides into. So you don't have to screw up the surface (visible) bit of the dash.

[david106]

£75 posted and I'm one of the watchers

[M0YDP]

No thank you David, i have been offered more, but to be honest with interest involved.. I would much rather leave it now and let it go the distance..

However, thank you for the offer...

Kind Regards

Steve

[M0YDP]

CD is now Sold, admin please remove..

Thanks for the use of the site..

Kind Regards

Steve