Agent Orange

[mealic]

Sounds like some real thoughtful work going on in there Martyn.A 3.73 axle eh? You`re just getting greedy for that fastest Di time at North Weald.

As for Adam and his new wardrobe....................................he certainly needs one,poncing about in that yellow cycling"thing" all weekend

[martynx]

It doesn't really shift no , only had a quick go in it though ( taking it easy with the new turbo ) & as 140's go it feels on the slow side of the scale but runs nicely, the correct elbow just before compressor housing should help things as there's a mismatch of 20% or more in differing flange sizes, I'm thinking turbulence.. ordered right part today also correct oil return pipe, again a fair difference in bore at flange.. once they are in I will then start proper testing & tinkering , measuring air flow & boost etc...

[ake]

It doesn't really shift no , only had a quick go in it though ( taking it easy with the new turbo ) & as 140's go it feels on the slow side of the scale but runs nicely, the correct elbow just before compressor housing should help things as there's a mismatch of 20% or more in differing flange sizes, I'm thinking turbulence.. ordered right part today also correct oil return pipe, again a fair difference in bore at flange.. once they are in I will then start proper testing & tinkering , measuring air flow & boost etc...

Happy days, that's another conversion we can file away for the future

[Guy88]

is it not a 330 in yours?


have you got contact details for the axle place,

Im after LSD's for my spec and 200 and a CW&P for the front axle in the spec to up the ratio

[limitedblack]

I like my hi-vis cycle top

[mealic]

I like my hi-vis cycle top

That`s good then Adam................................................................as it wouldn`t fit most of us

[martynx]

Axle man. - 07721 494987

[mickmk7]

Hi I have a 260 mk7 and I want to raise the back as it sits too low when loaded do the leafs just swap over from the 330 thanks

[martynx]

Hi I have a 260 mk7 and I want to raise the back as it sits too low when loaded do the leafs just swap over from the 330 thanks

Yes they are the same fitment across all FWD and RWD, you will need the right ( longer ) U bolts though. Ford list 3 lengths I believe.

My 330 Rwd shocks are 150mm longer than the Sportvan Fwd shocks though so that'll need some thought. I'm shortening the lower axle mounting on mine to match that of a Fwd before I fit the 260 shox

Got my 3.73 fitted today , its 1000rpm lower at 70!

Also got my Viper480 fitted - check out the cute remote

[ake]

Still wearing its show front number plate I see

[martynx]

Yes;) gonna put my private plate on it shortly so too tight to get another till then

[ake]

Did you do the alarm yourself

[martynx]

Nope read the manual & that was enough to put me off 100 quid & half a day later, all sorted

[ake]

Nope read the manual & that was enough to put me off 100 quid & half a day later, all sorted

It's the bigger man who admits his limitations

[martynx]

Backs now down by 75mm ( Midland Road Springs 01675 467 387 straightened the leaves a bit ) cheers Adam LimitedBlack for the contact



Refurbed towbar -


The hammerite is sexy on the bumper bar , may do the roof !