MOTed and ready for progress

[bigjohnthomas]

What's unusual about having no front tyre
I go with the frame too small

[BigMonty]

Next door was having a windscreen fitted today so i asked about my sliding windows and if there is anything that could be done . And there isn't. They ain't off a transit, and will never fit a transit unless i buy 2 side loading doors and cut the apertures 8mm smaller. f*** me off when you buy sh*t in good faith and its no good. £100+ down the drain.

[madbri]

Next door was having a windscreen fitted today so i asked about my sliding windows and if there is anything that could be done . And there isn't. They ain't off a transit, and will never fit a transit unless i buy 2 side loading doors and cut the apertures 8mm smaller. f*** me off when you buy sh*t in good faith and its no good. £100+ down the drain.

monty ive got a few rubbers here u could cut a bit out off

[Mr RVM]

Next door was having a windscreen fitted today so i asked about my sliding windows and if there is anything that could be done . And there isn't. They ain't off a transit, and will never fit a transit unless i buy 2 side loading doors and cut the apertures 8mm smaller. f*** me off when you buy sh*t in good faith and its no good. £100+ down the drain.

monty ive got a few rubbers here u could cut a bit out off

Wont work as that will make the rubbers a good fit in the aperture but the sliding window setup will then be loose in the now bigger rubber

[madbri]

Next door was having a windscreen fitted today so i asked about my sliding windows and if there is anything that could be done . And there isn't. They ain't off a transit, and will never fit a transit unless i buy 2 side loading doors and cut the apertures 8mm smaller. f*** me off when you buy sh*t in good faith and its no good. £100+ down the drain.

monty ive got a few rubbers here u could cut a bit out off

Wont work as that will make the rubbers a good fit in the aperture but the sliding window setup will then be loose in the now bigger rubber

surely just trim a bit off and stick it in the hole? even if jusy to keep the draft out?

[bigjohnthomas]

whats an appiture is it a hole with no hairs cant you just weld a bit of fridge or somthing round it to make it a bit smaller

[Mr RVM]

Think He's just going with the original fixed windows for this year and sort something out later on

[dieselhead123]

Good side loading door here Monts;
viewtopic.php?f=39&t=146774

I can get it up to Mania if you want it.

TIM

[BigMonty]

Thanks Tim, but that means i would have to buy 2 side loading doors , cut out the holes etc etc. Just to get these windows in. So just to get a set of sliding side windows in will be costing me over £250 because one of our forum members sold me the wrong windows.
time to move on, lesson learned, now wait until we get a minibus in at the scrap yard with the proper windows in.

[Mr RVM]

Any progress with the "frontal attack" Monty

[limitedblack]

Thanks Tim, but that means i would have to buy 2 side loading doors , cut out the holes etc etc. Just to get these windows in. So just to get a set of sliding side windows in will be costing me over £250 because one of our forum members sold me the wrong windows.
time to move on, lesson learned, now wait until we get a minibus in at the scrap yard with the proper windows in.

Bring the "wrong" sliders to mania, I'm sure someone will buy them if they haven't cut the holes yet.

[BigMonty]

Any progress with the "frontal attack" Monty

got a roller coat on the wings and bonnet this morning. Bonnet didn't turn out too well due to the wind and bugs. Wings are looking good. Put the lot on with a brush and then went over with a loaded roller. Came out well. One more coat and ready to put the bumper on

[Mr RVM]

Any progress with the "frontal attack" Monty

got a roller coat on the wings and bonnet this morning. Bonnet didn't turn out too well due to the wind and bugs. Wings are looking good. Put the lot on with a brush and then went over with a loaded roller. Came out well. One more coat and ready to put the bumper on

NICE ONE really "motoring" now

[jr71]

Looking good bigmonty, it's amazing how far resto will go to work on a transit.

On a truthful note he's a diamond geezar, not many peeps would have done it.

Good luck with the rest of the van m8

[BigMonty]

Sure is matey.
he doesn't eat or drink much either.