Transitmania 12 @Santa Pod 15th to 17th May 2020


Pictures of all available correct size pcd Transit alloys

Post all custom related threads here!

Moderator: Luke

Pictures of all available correct size pcd Transit alloys

Postby Luke » Tue Apr 17, 2007 7:36 pm

Thought i would start a thread on transit alloys, complete picture list of all 160mmx5 pcd alloys - the proper size :!:
so anyone after a set of alloys can see all the options in one place :D saves buying a set then thinking - oh i prefered them :x :lol:

please add to the list :D

but only post alloys with a transit pcd this is for those who want "proper fitting" alloys, no adapters or redrills here :lol:

also if you want to chat about a set make a new post as this thread will be ongoing for a good time yet :lol:
Last edited by Luke on Tue Apr 17, 2007 8:11 pm, edited 2 times in total.
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby Luke » Tue Apr 17, 2007 7:39 pm

Image

AEZ vantage available in 6x15" ET50

DOL wrote:thats whats on my MK5 but they are 16" 8) (they did come off a mk6 tho) :D only mod was the front bolts that hold the disc on had to be countersunk and hex studs used :lol:
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby Luke » Tue Apr 17, 2007 7:42 pm

Image

VANTEC available in 6x15"
Last edited by Luke on Tue Apr 17, 2007 7:55 pm, edited 1 time in total.
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby Luke » Tue Apr 17, 2007 7:53 pm

going for the classic look 8)

Image

slotmags are available in 14" :!: unfortunatly these are very rare :(
Last edited by Luke on Fri Jul 20, 2007 10:15 pm, edited 1 time in total.
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby Luke » Tue Apr 17, 2007 8:07 pm

Image

the Tourneo 14" these are offical ford alloys also fitted to hallmarks, quite readly available but they dont have much of an offset ie they dont fill the arches well so if fitted to a mk3 rear axle they will need shimming out :!:
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby rover » Tue Apr 17, 2007 8:08 pm

Vantec '2' 6x16

Image

Rover.
User avatar
rover
Transit Extremist
Transit Extremist
 
Posts: 6403
Joined: Mon Nov 21, 2005 12:03 am
Location: Nottinghamshire

Postby rover » Tue Apr 17, 2007 8:09 pm

Alesio 6.5x16 for the Mk6/7

Image

Rover.
User avatar
rover
Transit Extremist
Transit Extremist
 
Posts: 6403
Joined: Mon Nov 21, 2005 12:03 am
Location: Nottinghamshire

Postby Luke » Tue Apr 17, 2007 8:10 pm

Image

The latest mk7 alloys, 16"

now mk6&7's have 14mm studs (earlier have 12mm) so may need special nuts if fitted to an earlier mk :!:
Last edited by Luke on Tue Apr 17, 2007 11:05 pm, edited 2 times in total.
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby rover » Tue Apr 17, 2007 8:19 pm

Fox Viper, now available in 6.5x16 and 6.5x 15, 14mm studs.

Image

Rover.
User avatar
rover
Transit Extremist
Transit Extremist
 
Posts: 6403
Joined: Mon Nov 21, 2005 12:03 am
Location: Nottinghamshire

Postby rover » Tue Apr 17, 2007 8:21 pm

Ronal R44, 6.5x16

Image

Rover.
User avatar
rover
Transit Extremist
Transit Extremist
 
Posts: 6403
Joined: Mon Nov 21, 2005 12:03 am
Location: Nottinghamshire

Postby rover » Tue Apr 17, 2007 8:25 pm

CW 'CWC' 6.5x16 (14mm)

Image

Rover.
User avatar
rover
Transit Extremist
Transit Extremist
 
Posts: 6403
Joined: Mon Nov 21, 2005 12:03 am
Location: Nottinghamshire

Postby Luke » Tue Apr 17, 2007 8:46 pm

The MK6 TOURNEO

Image Image

these are official Ford alloys, quite readly available in 16"
Last edited by Luke on Thu Apr 19, 2007 10:44 pm, edited 1 time in total.
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby Luke » Tue Apr 17, 2007 9:07 pm

Wellers (8 spoke)

Image

OK - not actually alloys :roll: but look great, quite rare but do crop up from time to time, available in 14" and apparantly 15"
wellers were designed around the mk1&2's so have a very deep offset they will cause clearance problems with the sliding door on a mk4/5


but make 100% sure they are not landrover mangels or landrover wellers as they are very similar but 165mm pcd not 160mm so not safe to fit :shock:
Last edited by Luke on Tue Apr 17, 2007 11:00 pm, edited 2 times in total.
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Postby Guy88 » Tue Apr 17, 2007 9:15 pm

Another style of wellers (modular) - 14"

Image
picture courtesy of AlanN 8)

Some more here! 8)
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44

REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD

LIVIN' LOUD
User avatar
Guy88
Site Moderator
 
Posts: 17046
Joined: Wed Mar 29, 2006 10:37 pm
Location: Banbury, oxon

Postby Luke » Tue Apr 17, 2007 9:37 pm

another rare one :lol: ive never seen any but they are transit alloys, the van they are off is italian, and they look 14"

Image
User avatar
Luke
Site Admin
 
Posts: 42460
Joined: Wed Mar 02, 2005 12:53 am
Location: Rotherham, Yorkshire!!

Next

Return to Customising and one offs



Who is online

Users browsing this forum: No registered users

croncroncron