Loots Red custom

[bambi mk 1]

http://www.partfinder.ie/#home Plenty here

[loot]

Just need to put the bumper on it technically:-)

Need to sell snowflake before the transition too it's a logistical nightmare

[bigjohnthomas]

logistical nightmare .. I tell thy about logistical nightmares....
my mk7 is so good it has to be replaced by 2 vehicles so I have to get sooty motd taxed and sh*t before I can insure billy then take the lime off the road to clean it before I can sell him
bloody ford
bloody sooty vans

[ned]

There is a member on here that has put a van wanted thread up recently, might be worth checking his credentials to see if he qualifies for either of your vans. N

[loot]

He said definitely no lwb what's 10 inches eh

[loot]

Bought some antifreeze, it says o.a.t on the can and says it is suitor for Ford 13212321a b c d and the guy said it was ok for the custom

Also bought a Vauxhall 1.7 fan belt for it as the original fouled up and i had to cut it off, it's for the powerall alternator, I'm hoping that with the engine running it'll power the interior leds and 240 sockets, i just hope there wasn't other batteries required and they've taken them out? Bloody hilti

[bigjohnthomas]

I looked under the bonnet but I don't think its going to help as you can't see anything
thers s a round thing with orange stuff in the way of the silver thing

[bigjohnthomas]

https://youtu.be/YhJyvnvqFl4



its all boxed off man

[loot]

Ah sweet that'll do nicely with the ac pipes cheers, other stuff can't be seen so I'm not too worried, can't really go anywhere else tbh anyway but I'll zip tie it and scotch block it where needed so it doesn't wobble

[loot]

Can't get the stupid Vauxhall fan belt on

[Altransit]

Can't get the stupid Vauxhall fan belt on

Maybe that's because it's a FORD

[loot]

Can't get the stupid Vauxhall fan belt on

Maybe that's because it's a FORD

It's hilti's fault, i got the belt on but when i run the engine the belt is trying to come off the crank pulley pulley some lungfish's washers are needed i think

[loot]

Well i fitted the powerall belt but it wants to come off also the alternator is clicking, it is working tho, i managed to turn a hair dryer on using the 240v socket, it seemed fill power too

Think I'll phone powerall tomorrow and ask.

[bigjohnthomas]

240v ? what kva is the little bugger?

[loot]

Not sure, there's no numbers visible
On the control panel i can turn it low high which revs the engine a bit higher, there's no weld switch tho so at a guess 2-4kva max.?