ned wrote:Everyone's got to learn to weld one day I picked up a used welder on eBay for 40 sovs, I know what you mean with the arch kit, my Weller stick out slightly but so far I have got away with it
I look forward to seeing the progress on your van
You'll be racing Mutley down the strip before you know it N
RustWidow wrote:ned wrote:Everyone's got to learn to weld one day I picked up a used welder on eBay for 40 sovs, I know what you mean with the arch kit, my Weller stick out slightly but so far I have got away with it
I look forward to seeing the progress on your van
You'll be racing Mutley down the strip before you know it N
He’d win, I’m down 15hp to his lol
Brains_transit wrote:It looks good or is that the better side mk7 rear lights and clear indicators on the mirrors are good mods
dumper wrote:I made a quick fix lamp bracket for my mk6 to take 4 Lucas 20/20 @ 2 super oscors on it what I did was to remove front bumper and out of quarter plate i used spacers and bolted straight through to the bottom of the xmembers with the spacers in between to really stiffen it up on top of this I used anger iron &flat bar to make two brackets that that came up and move out and came out forward under the bumper on the end of them I drilled and welded in a transit wheel stud that when the bumper was re fitted all you had was two studs sticking up out of the bumper and when I needed to fit the lamp bar I just dropped it on the studs and used locking wheel nuts to hold it on with the multi plug for wireing on top of the bumper it only took two minutes to fit or remove I had the same system on my mk3 @ mk5 not sure if I will be able to fit it two my mk8
Return to Members Transits Gallery!
Users browsing this forum: No registered users
This site contains affiliate links for which we may be compensated.