Neds Turbo (discussion topic)

[ned]

Possibly, does it look like a pain in the arse to get at, I've almost got the part off the van then I'll see the numbers and order the new part

[gotgcoalman]

post back in a year

If it's the same turbo in the same place it's in the wizards hidden cavern of much peril.

If you venture in and get caught you must decorate the wizards palace in not magnolia.

Sodding thing is easier to get to with the bonnet off on the shitcar.

Hoping for vroommmmm tooot shortly

[gotgcoalman]

I know 1 of those lives on the Shazda and there's is a working 1 lurking here so.........

I'll find the best 1 and then.

I'll lick them both tomorrow

[ned]

Is the shazda a 2.0L,

I can't believe after 225,000 miles it just breaks like that, shoddy goods if you ask me

[ned]

Can any of you kind mods add this to this thread, please,
viewtopic.php?f=14&t=198804&c=1#p1682567
Many thanks Neil

[Altransit]

Your wish is my command Sir Nedley

[ned]

Your wish is my command Sir Nedley

Many thanks my good man, you'll be rewarded with jelly babies thought it best to keep this all in one place

[ned]

New tool arrived today

IMG_20200326_165201.jpg

That'll turn my breaker bar into a ratcheting bar, 512nm of torque apparently it can take better had do for £17.

[gotgcoalman]

Is the shazda a 2.0L,

I can't believe after 225,000 miles it just breaks like that, shoddy goods if you ask me

It's been on ramps here for a year (like your beemer)
The sodding car that belongs to eldest lad who bought the bloody L200 and neglected to finish fixing his car.

I started putting the thing back together and ordered an anal327 code thing just need foreskin for when it arrives.

kids are so much fun

[gotgcoalman]

New tool arrived today

IMG_20200326_165201.jpg

That'll turn my breaker bar into a ratcheting bar, 512nm of torque apparently it can take better had do for £17.

where does that go

[ned]

New tool arrived today

IMG_20200326_165201.jpg

That'll turn my breaker bar into a ratcheting bar, 512nm of torque apparently it can take better had do for £17.

where does that go

That wee tool goes on the end of the breaker bar where the socket goes then the socket goes on that

Today the snail will be removed, I can get the numbers off it then and take it apart

So what's your plan with ye ol' shazda? Let it sit there for a few more years of throw it back together and sell it on? Don't the L200's snap in the middle

What was the shazda's fault in the first place, it's been that long I've forgotten I might start on the old Beemer during this lock down go out and get shot business

[ned]

This is where the new wee tool goes,

IMG_20200328_124657.jpg

And it's off

IMG_20200328_130920.jpg

Only 3 sheared bolts

[gotgcoalman]

The shazdas engine became terminally broken after being "terracleaned"

Engine swapped for 1 out of a mazda 3 (same engine as the shazda 6)
BUT all the pipe work was different (fuel/water)

All pipe work now done just battery tray and air box and a bit of wiring to re connect.

Drive shaft to go back in and suspension to put back.

[ned]

Nice big job for you then Mr GCM sir, at least it keeps you out of trouble, can you remember where everything goes? I have to take photos or I forget what's what

[ned]

Well that's the turbo stripped down, I'm pretty sure the exhaust propeller isn't supposed to fall out, going to order the cartridge and clean everything up, think the exhaust propeller breaking instead of the other side has saved my engine from running away and killing itself