Mk5 TD Minibus breaking

[MinorMatt]

I have a W reg mk5 SWB, TD 12 Seater (no rear seats) minibus in at the moment for breaking...

It has ABS, Twin Airbags, Electric Windows, Electric Mirrors etc

Anybody need anything? I will only have it for a month or so before I will have removed anything I think is worth having and it becomes a metal cube!

[00353theking]

How much do you want for the electric windows inc door cards and wiring i want to fit them in my van

Sent from my SM-G965F using Tapatalk

[MinorMatt]

Postage to AUS will be ridiculously expensive!! Do you have the high spec dash loom?

[Motorhome perils!!]

Hi, What engine is in it, does it run
and how much would you want for it?

[00353theking]

You could post them to portsmouth i can take them back with me next year, not sure about the dash loom , it has central locking could you tell by the vin number ?
If it dosent have that type of dash loom can it be fitted ?

Sent from my SM-G965F using Tapatalk

[MinorMatt]

Portsmouth isn't a problem - I could probably even drop bigger stuff off there in person.

Chances are you have the high spec loom. If you take the "speaker" cover off in the footwell - if there are 2 sockets there then you have the high spec loom.

If you pop the either of the 2 square blanks out of the dash (the group of 2) and there are red sockets behind - then you also have the high spec loom...

If you look in the engine bay, under the scuttle panel and there is a thick wire in each top corner with a single round connector (for the heated windscreen) then again you have the high spec loom

[00353theking]

Portsmouth isn't a problem - I could probably even drop bigger stuff off there in person.

Chances are you have the high spec loom. If you take the "speaker" cover off in the footwell - if there are 2 sockets there then you have the high spec loom.

If you pop the either of the 2 square blanks out of the dash (the group of 2) and there are red sockets behind - then you also have the high spec loom...

If you look in the engine bay, under the scuttle panel and there is a thick wire in each top corner with a single round connector (for the heated windscreen) then again you have the high spec loom

Ok i will check ,
But if i dont have the high spec loom can it changed ,
Or could an auto electrician wire them up ?
Thanks Gerry

Sent from my SM-G965F using Tapatalk

[MinorMatt]

Hi, What engine is in it, does it run
and how much would you want for it?

Its a 2.5TD - the bus was originally 85PS - but I am not sure yet whether its a turbo engine that's had a bosch pump fitted, or a non turbo that's had a turbo and all the bits fitted.

I *suspect* its the latter but im not sure.

£350. You can see it running and drive it (off road and without brakes!) if you want before it comes out.

[Riggard]

I'm looking for a few plastic parts for my mirrors. Numbers 10, 7 and 6 in this picture: https://ford.afora.ru/img/cgm/Z001313600.gif number 10 in the picture.
One of each should be enough, but if you have a few, that's even better.

Happen to have these and is it possible to ship to the netherlands? Should fit in an envelope I reckon.

[MinorMatt]

I'm looking for a few plastic parts for my mirrors. Numbers 10, 7 and 6 in this picture: https://ford.afora.ru/img/cgm/Z001313600.gif number 10 in the picture.
One of each should be enough, but if you have a few, that's even better.

Happen to have these and is it possible to ship to the netherlands? Should fit in an envelope I reckon.

Ahh the bits that always go missing...

I try to keep them for myself tbh, but I will see whats on it later