What size of spline to remove the seats?

[SandyHenderson]

I bought an m11 after a few Google searches and it was too big

[Altransit]

Some say they are an M11 Ribe, and some say they're T55 Torx

I don't know, I never took the seat out of my Connect

[SandyHenderson]

I bought the M11 ribe and it's too big to fit. Might try a T55 next unless someone can confirm so I don't keep spending cash

[Altransit]

If I could, I would go and check for you, but the Connect was sold back in 2018

[SandyHenderson]

Don't worry yourself I appreciate the help regardless!

[s2martin]

In my 2003 Connect they are are T50 Torx and one 15mm nut.

[SandyHenderson]

That sounds more like it tbh. I was considering getting the t50 since the M11 was too big. Cheers bud!

[swishvan]

Torx 50 and 16mm socket some have 15 mm socket depending on year

[SandyHenderson]

Thanks guys! I'm gonna get to it soon

[LostinTransit]

The 2020 gets an M10 torque bolt the length not sure about cause we've not yet taken these bolts out ourselves. But we will soon as we're installing some spacers to lift and tilt the seat forward approx 1-2 inches.