Ford Transit AWD PIDs

[VxO]

Good evening,
I should monitor the AWD system of a Transit 2.0l produced in 2018.
I can't find dedicated PIDs. Does anyone know if there are any?
It would help me to at least know the front differential oil temperature.
Thank you very much for helping!

[knobby1]

Good evening,
I should monitor the AWD system of a Transit 2.0l produced in 2018.
I can't find dedicated PIDs. Does anyone know if there are any?
It would help me to at least know the front differential oil temperature.
Thank you very much for helping!

I'm not sure they even have diff oil temp sensors.

Lord Knobrot

[VxO]

Near the solenoid there is a bulb that appears to be a sensor (see attached photo).
I need to monitor it via OBDII.

[knobby1]

Near the solenoid there is a bulb that appears to be a sensor (see attached photo).
I need to monitor it via OBDII.

Looks like a pressure sensor...but yes, there should be info for it somewhere within Forscan one would think.

Lord Knobrot

[VxO]

Unfortunately I can't find the right PID.
Does anyone know if there is a way to deduce this?
Maybe by disconnecting the sensor, and inducing an error, with Forscan I could understand something more.
Thank you.

[knobby1]

Unfortunately I can't find the right PID.
Does anyone know if there is a way to deduce this?
Maybe by disconnecting the sensor, and inducing an error, with Forscan I could understand something more.
Thank you.

AWD's are quite rare and not many on here have them....so not much info about them to be had.

Lord Knobrot

[Blizz]

Probably that is not a temp sensor but a switch so the ECU knows when is the front diff engaged...

[VxO]

I don't know if it's a sensor or a switch.
In any case, if I disconnect it, the fault and unavailability of the AWD system are indicated on the dashboard display. Unfortunately I can't intercept any DTCs using Forscan and Obdlink.
Can anyone tell me how to find the DTC or any sensor reference with Forscan?
Thank you.

[knobby1]

I don't know if it's a sensor or a switch.
In any case, if I disconnect it, the fault and unavailability of the AWD system are indicated on the dashboard display. Unfortunately I can't intercept any DTCs using Forscan and Obdlink.
Can anyone tell me how to find the DTC or any sensor reference with Forscan?
Thank you.

It may not even exist in Forscan...Forscan caters many doezens of different vehicles and to cater for all vehicles is a mammoth job for a free software....especially for a small amount of AWB Transits. Send Forscan themselves an email asking the question on their forum.

https://forscan.org/forum/

Lord Knobrot