Mk1 Window Seals etc

[Trinny]

I Need seals for '71 Van, but have no pattern to match with Woolies
catalogue will I have to buy from the German MotoMobil?
Thanks

[Luke]

which window seals are you after

[Trinny]

The window seals for both door windows (driver and passenger) interior and exterior rubbers and the quarterlights which I'm told are the opening type

[Luke]

the door window seal rubbers are a continual long seal that runs all the way around - i'll see if i can get a copy of the profile from one of my spares

the exterior seals are a bit more difficult to get a copy of

[Trinny]

I have got one exterior window seal that sits on a lip
next to the window I need a reverse of one of these( for the passenger side and the interior versions of both
Are we on the same page here ,I'm talking about the seals which prevent water from ingressing past the wind-up windows of the Driver and Passenger doors.

I also need a L/Hand rear door seal (the big one that prevents ingress to the load area
thanks

[Luke]

could do with a drawing

i think the inside one is just a rubbing strip that prevents the glass from scratching the frame

[Luke]

just had a quick look but cant see it ifs listed in here http://www.oldcars.de/kataloge/transit_ ... eutsch.htm

[Trinny]

Luke,
There is a seal diagram at the bottom of that page in the link you provided,
009-010 is the block to click on

my steps create pools when it rains

Sorry for late reply

[Luke]

which bit then

[Trinny]

All the window related bits 1,2,3,4 cant see what 4s for though
got to go out Ill reply in 2 hrs

To top it it all the winder has failed today so
the window keeps opening, no excuses not to operate now!

thanks

[Luke]

well no.1 the door seal - mk2s have a different seal - looks a bit better design, im actually after one myself for the drivers door but i do have a copy of the profile of the mk1 one and ive probly got a mk2 one somewhere - just not in perfect condition, but good enough to get a sample off

no.2 is shown as a short strip but it actually goes all the way round the window and back down the channel

no.3 (inside one) is a rubbing strip on the mk1's in not sure what it is on the mk2's but it doesnt look like the outer one is listed -just the pic

no.4 i assume is the clip to hold it on

where abouts are you? are you UK based?

[Trinny]

Hi ,Nottm ...midlands
so my original question was, 'will I have to buy new from Motomobil'
the answer is yes?
do they speak English well?

[Luke]

never used em

if i get a pic of the profile can woolies make em to suit

[Trinny]

Woolies said they would be able to match to a sample
which is why I was stuck

[Luke]

well now i know which bits you are after i'll post up what i have

at the moment the one i have here is a mk1 one piece door seal, i'm not sure if its the same profile as the door but i'll draw it up and post it here

mabe someone can confirm if its the same

i'll get the others and post them too - it will be usefull info to have on here and if woolies can do them mabe if we get a referance number so others can get the same