interior ventilation/heater fan

[gazza341]

any ideas?

my interior ventilation/heater fan on my connect t200 only works when the fan switch is set to 4, all the other settings (1,2,3) don't get the fan moving at all

cheers

gazza

[coconut]

Probably the blower motor resistor burnt out. I think its screwed in next to the motor and will have 4 thick wires going to it, check the multiplug for damage as well

[Fas]

it should be on you heater matrix, on the mk5 fiesta's they are in the passanger side footwell, have a look down there should be held on by only one screw.