24v cosworth v6 wiring

[24v]

Hi .I am looking for some info on wiring the 2.9 v6 24v and auto box into my mk2 Transit.Have the loom complete ready to install but need to identify which wires go where.Any advice would be great

[Luke]

tony's posted some wiring diagrams in this post viewtopic.php?f=13&t=26266

you can save them to your computer and print them off - the last one is the best imo and thats the one i used

i followed it through and cut out all the aircon wires from the ecu back - just to neaten it up

also i think the best place in a mk2 for the ecu is where i have it in mine - i'll see if i can find a pic

[Gavin]

viewtopic.php?f=13&t=26266


might be of some use. if you go to the Granada Scorpio Online forums, theres a guy there who sells complete manuals for stripping the boa also, ive got one and its quite good.

[24v]

Thanks for the tips.
Will no doubt have more queries but will print off that diagram and see where it takes me.

[Luke]

couldnt find a pic of my ecu but its in the engine bay behind the battery on the bulkhead - putting it there you dont need to go through the bulkhead and all the wires reach spot on

[24v]

Thanks will try that.