cosworth mk2

[24v]

Give me a day or so to organise the pic.
Also will I just redrill the rear drums and half shafts aswell?
Can a higher ratio steering box be fitted to make the steering lighter?
If so are they available?

Thanks

[Luke]

you've got to be carefull redrilling the rears the brake drum relys on the 160pcd to work and the center hole is very large so if tha goes over the new pcd it wont work to do mine to 112pcd i converted to disks

if you can put up with the extra width then adapters on the back is the easy way

post a pic of the alloys too

with the front to make the steering lighter without pas it would also increase the turns lock to lock

[24v]

Will put up a picture of both.
I dont understand what you mean about lock to lock on the front?
What brackets did you use for mounting the calipers?
As mine looks like a version of an english axle I am going to see if the off the shelf brackets might fit?

[whitevanman66]

lookin good ..i think transits should come with cosworth as standard ....i like the cossie turbo lump (yb) myself ,i think its such a nice lookin lump ..first time ive seen a cossie goin in an older trannie too ..keep the pics comin

[Luke]

I dont understand what you mean about lock to lock on the front?

basically you turn the steering wheel more for the wheels to turn the same - try greasing the king pins and good tyres - even with the V6 it shouldnt be that heavy

What brackets did you use for mounting the calipers?
As mine looks like a version of an english axle I am going to see if the off the shelf brackets might fit?

i made the brakets - theres a thread on here in customising section with pics and a guide to how i did it

first time ive seen a cossie goin in an older trannie too ..

not seen mine then

[AlanN]

lookin good ..i think transits should come with cosworth as standard ....i like the cossie turbo lump (yb) myself ,i think its such a nice lookin lump ..first time ive seen a cossie goin in an older trannie too ..keep the pics comin

Yer!!! Common as muck
I must admit the YB does look better, but the sound out of the back of the V6 is awsome

[whitevanman66]

theres a capri started to show its face lately in pompey,sounds like a rover v8 or chevy big ponies ..that sounds nice too

[24v]

Hi
still trying to organise photos.
I read the how to on the disc conversion.
What vito discs did you use?what model?
I am going to go this route after seeing the drum.

Might go to Transitmania.

[24v]

[24v]

[AlanN]

Keep them pictures coming

[Luke]

looking good on mine i needed to relocate the coil pack - its right down on the bulkhead and the plenum needs to come off to get at it! - yours must be further forward and mabe a bit lower than mine

What vito discs did you use?what model?

cant rememebr tbh but they were 10mm thick i think if that helps

[neilc5023]

looking real good how much were the rims?

[oldskooler]

crackin project there keiran. it has to be the first 24v tranny transplant in ireland. your tempting me to become number two!!

[24v]

Thanks Declan
Im hoping to have it ready for Mondello Live.....
Are you going?