Mk6 Variable Intermittent wipe!

[iiyama]

Ok Ill keep looking, got a part number? I know damn well that if I end up going to a stealer they'll want one!

[Terry]

100T280
I have a Scorpio (P reg) as a spares machine, if you can tell me which relay & in which box (there are 2 under the bonnet),
I can send it to iiyama. Knowing the Scorpio its unlikely there is only one red one ! ? !
(Damn thing has more electricks than the tower at Blackpool )

[executivetravel]

Any Granada Mk2 with rheostat controlled variable intermittent, or Mk3 with 6 speed rotary stalk control will have the 5 pin red delay relay.

Q. If I found a mondeo in a breakers/salvage yard with the 6 speed wiper delay would that have the correct relay for me to fit into a Mk6 Transit?

[Terry]

Afternoon
I checked both fuse boxes under the bonnet of the Scorpio and just to prove me a liar, there are NO RED relays loads of other colours brown, green, yellow & the usual black ! I would like to convert mine too, but no luck !
Sorry

[100 T280]

Q. If I found a mondeo in a breakers/salvage yard with the 6 speed wiper delay would that have the correct relay for me to fit into a Mk6 Transit?

Maybe on a Mk1, later ones use module I think.

Afternoon
I checked both fuse boxes under the bonnet of the Scorpio and just to prove me a liar, there are NO RED relays loads of other colours brown, green, yellow & the usual black ! I would like to convert mine too, but no luck !
Sorry

Should be, my Granada Scorpio is at my parents house, so I can't check just yet...

[100 T280]

Relay looks like *THIS*

...but has 5 pins and not four.

Pin layout as per eBay listing, 31 54 31B1 31B2, and additional central pin marked P

None on eBay at the mo. of course....

[iiyama]

Havent been any on the bay for a while, been searching for Granada/Mondeo/Focus.

[executivetravel]

Step 1 completed

won a variable speed mondeo wiper stalk off ebay.

wire+connectors are easy and in stock (in my bits box)

now then, this relay.....

[executivetravel]

just 1 question

how do i get to the base of the relay holder to place the middle pin connecter?

[iiyama]

isnt the connector the same? Just needs an extra wire run from it?

[executivetravel]

isnt the connector the same? Just needs an extra wire run from it?

maybe but you have to get to the rear/underside of the relay socket to add the connection

[100 T280]

Normal crimp-on terminal will fit (without the plastic covering) The proper terminals are available and I'll hunt some down one day, then take off dashboard cover and fit / tape wire into loom.

[iiyama]

I meant the connector at the stalk, not the relay housing!

All automotive connectors are available here:-

http://www.vehicle-wiring-products.eu/V ... gterms.php

[executivetravel]

now in confused

the relay is under the plastic tray/cover on the pasenger side of the dash

the relay is easy to extract but the connecter will have to sit in the base/holder wont it?

[iiyama]

yup, should push in from underneath and then click inot place.