Luton wanted

[Carltina]

Minimum 12' along floor but 13-14' preferred and without a taillift.

[madmark_50484]

Well I have one that needs a bit of tlc where abouts are you

[Carltina]

Hi Mark, Birmingham. Will travel.

What does it need?
How long's the floor?
Tail lift or not?
How much are you asking?

[Carltina]

Also,

What's the mileage?
Any receipts / history , cambelt change

I'm guessing it's the white one in your avatar.
Looks like 7'6" height in box(?)

Regards
Carl

[madmark_50484]

Ok I am in southend on sea, Essex is that too far. I believe it has a 13 6 box but i will have to double check the problem is the wings need replacing I have bought 2 new wings which will come with it it also has a problem where it sometimes jumps out of 4th gear someone said it could be the selector but I wouldn't want to confirm that

this is the gumtree ad I did have http://essex.gumtree.com/essex/46/48862446.html

I was after £1000 but Im open to offers

[Carltina]

Thanks.
Ok wings included - are they bolt or weld on?

Ad says tail lift but it looks like there isn't one (I don't want one anyway, too heavy - didn't we speak about this months ago and you said you didn't have one and then somone wanted a piano moving straight after I said taikl lifts are unnecessary except for pianos?!)

Would you measure it please, looks less than 13'6" along floor - don't know why but it's seems very common to have to dimensions wrong, either longer or shorter. I think most people just guess it LOL

[madmark_50484]

No tail lift I tried to copy and paste someone elses add so no tail lift

I think the wings are weld on otherwise I would have done it myself I did measure some time ago I'm sure its 13 6

[MinorMatt]

The wings are welded on. HOWEVER they arnt structural and new ones can be fitted however you like (within reason) screws/rivets/glue etc. To remove them there are about 30 spot welds on each that need drilling out

[madmark_50484]

Ahh now that makes sense my old green I had had screws in the side and I could never work why

[Carltina]

Thanks guys.

Mark, any leaks or other faults?

[madmark_50484]

No leaks only other thing cab could do with a clean I will do that anyway and the drivers seat is torn it has mot till may and taxed to the end of the month

[madmark_50484]

more pics here viewtopic.php?f=7&t=55647

I always do that

[Carltina]

Thanks, can't see anymore pics though, did you forget to put in link?
May be able to view Monday

[Carltina]

Thanks.
I see, it's 13'6" inc luton. Too short for me I'm afraid. I need that dim along the floor but thanks all the same

[madmark_50484]

Ok no probs