fitting a new steering rack

[spanners]

alright lads hope u can help me ?i want to fit a new steering rack well convert to power steering is it just a case off unbolting the steering uj-two bolts that hold it -the two track rodends and it will just come out ? are there ant problems i should be aware off ? ie getting the rack out ? thanks lads

[AndyG]

Exactly as you say

[AndyG]

The worst part of the job (believe it or not) is getting the 3 bolts into the engine block that hold the pump bracket as they haven't been used up until now

[spanners]

great stuff any problems getting the rack out looks like its going to be tight ill use a tap on them threads so there free befor i go ahead thanks

[billybun]

you will need a longer bolt for the front of the powersteering bracket ,dont forget to unbolt the one in place first ,dont use bolts with thread all the way up or they soon snap of ,the bolt needs to be smooth where it goes thro casting of bracket .use a standard 1/2 extension bar and racket in star shaped hole on pump to tension belt,good luck,best wishes Billy

[spanners]

cheers lads me vans lookin good now but i dont no how to put pics up on here im no good on computers