clutch info req'd

[the_big_fact_hunt]

the clutch has just gone on my 2002 LDV 100ps turbo Di, i know transit clutch's fit, but do they all fit? are all the turbo clutch's the same?
My old tourneo is on loan to another member while he has no transport and i could do with fixing the LDV fairly quickly.
Yeah, yeah LDV etc etc, but its actually in good nick, low miles and tidy, i just cant afford a mk6 tourneo yet

[psv-hgv-flt]

yes, 241mm.

[the_big_fact_hunt]

do you know what EN55 and ET70 means referring to the gearbox? i have only heard of the MT75 fitted to LDV's (AL4D? and type 9 amongst others on Transits) is it an LDV code?

[the_big_fact_hunt]

as an afterthought, i guess the size refers to the plate diameter, would it hurt if i fitted a smaller one?

[psv-hgv-flt]

do you know what EN55 and ET70 means referring to the gearbox? i have only heard of the MT75 fitted to LDV's (AL4D? and type 9 amongst others on Transits) is it an LDV code?

en55 is the old 2.5 peugeot lump and et70 is the turbo pug.

[the_big_fact_hunt]

the majority on offer seem to be 241mm?

[psv-hgv-flt]

the majority on offer seem to be 241mm?

do you have the 2.5 epic, as that must be one of the last on that year.??

[the_big_fact_hunt]

do you know what EN55 and ET70 means referring to the gearbox? i have only heard of the MT75 fitted to LDV's (AL4D? and type 9 amongst others on Transits) is it an LDV code?

en55 is the old 2.5 peugeot lump and et70 is the turbo pug.

aaahhh.... useful input...

[the_big_fact_hunt]

yes mate, 100ps TDi epic on 02 plate, ex RAF previously reg'd on a 51

[psv-hgv-flt]

same as transit.

[the_big_fact_hunt]

cheers, that much i already know, but there seems to be different sizes, guess i'll just grab a Tranny TDi clutch and hope for the best

[psv-hgv-flt]

http://cgi.ebay.co.uk/VCK1007-FORD-TRAN ... 38004r6188

for refrence. i am shure i got a clutch book someware. and try fords as i got one from ford and it was cheaper than the sh*t i bought off ebay that rattled at low rpm

[the_big_fact_hunt]

cheers matey, will give the robdogs a call tomorrow, looking at the ebay ad, since when is cumbernauld in north lincs????

looks pretty much like any 97on TDi clutch will fit, thats why this forum is so good, people with info that are ready to help others

[psv-hgv-flt]

cheers matey, will give the robdogs a call tomorrow, looking at the ebay ad, since when is cumbernauld in north lincs????

looks pretty much like any 97on TDi clutch will fit, thats why this forum is so good, people with info that are ready to help others

lincs yea, i see that, and just been in garage and yes it is 241mm.

[the_big_fact_hunt]

is this the point where i go......... ner ner ne ner ner??