*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


MOT question

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

MOT question

Postby Guy88 » Wed Sep 29, 2010 7:39 pm

Just a quick question, is a hole in the sill and a rotten floor an MOT fail :?:
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44

REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD

LIVIN' LOUD
User avatar
Guy88
Site Moderator
 
Posts: 17042
Joined: Wed Mar 29, 2006 10:37 pm
Location: Banbury, oxon

Re: MOT question

Postby dodgy01 » Wed Sep 29, 2010 7:48 pm

where in the sill and in the floor it the hole

if they are with in 30 cm of any suspension , or brake componant or seat belt and seat mount then yes
dodgy01
Transit Fanatic
Transit Fanatic
 
Posts: 2332
Joined: Wed Nov 04, 2009 8:32 pm
Location: braintree essex

Re: MOT question

Postby Guy88 » Wed Sep 29, 2010 8:01 pm

floor is above rear axle

sill is under rear of SLD bout 3" in front of rear wheel
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44

REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD

LIVIN' LOUD
User avatar
Guy88
Site Moderator
 
Posts: 17042
Joined: Wed Mar 29, 2006 10:37 pm
Location: Banbury, oxon

Re: MOT question

Postby Mikey B » Wed Sep 29, 2010 8:05 pm

Floor should be ok but the sill is too close to the suspension mounting. But its almost impossible to say without seeing any pics or the actual vehicle.
MKB Autos All makes and models catered for.
Mikey B
Ford Technician
 
Posts: 517
Joined: Thu May 13, 2010 11:03 pm
Location: North Wales

Re: MOT question

Postby Jim Archer » Wed Sep 29, 2010 8:06 pm

I believe sills count as a structural member, but Transits that old have a 'chassis' as well so don't quote me.

Jim
Mk7 140 Jumbo - Vantunered.
289,000 and counting.
Jim Archer
Transit Fanatic
Transit Fanatic
 
Posts: 3434
Joined: Sat Sep 29, 2007 6:45 pm
Location: Southampton

Re: MOT question

Postby Guy88 » Wed Sep 29, 2010 8:15 pm

well the sill i can put my hand up and feel the wheel arch inside, its just on the inner sill where the panels join

its a MK5 SWB btw
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44

REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD

LIVIN' LOUD
User avatar
Guy88
Site Moderator
 
Posts: 17042
Joined: Wed Mar 29, 2006 10:37 pm
Location: Banbury, oxon

Re: MOT question

Postby dodgy01 » Wed Sep 29, 2010 8:37 pm

both will fail as the rear floor will be with in 30 cm of the load sensing valve for the brakes assuming it has 1
dodgy01
Transit Fanatic
Transit Fanatic
 
Posts: 2332
Joined: Wed Nov 04, 2009 8:32 pm
Location: braintree essex

Re: MOT question

Postby Mikey B » Wed Sep 29, 2010 10:04 pm

The first hole wont fail. It only fails if its within 30 cm of a mounting point, or has an adverse affect on steering or suspension.
MKB Autos All makes and models catered for.
Mikey B
Ford Technician
 
Posts: 517
Joined: Thu May 13, 2010 11:03 pm
Location: North Wales

Re: MOT question

Postby dodgy01 » Thu Sep 30, 2010 2:58 pm

The first hole wont fail. It only fails if its within 30 cm of a mounting point, or has an adverse affect on steering or suspension. OR BRAKES


first hole will fail if it is where i said
darren west
i am a mot examiner for vosa
dodgy01
Transit Fanatic
Transit Fanatic
 
Posts: 2332
Joined: Wed Nov 04, 2009 8:32 pm
Location: braintree essex

Re: MOT question

Postby Mikey B » Thu Sep 30, 2010 7:55 pm

I too am a mot examiner for vosa
A hole in the floor wont matter as its not structural....
MKB Autos All makes and models catered for.
Mikey B
Ford Technician
 
Posts: 517
Joined: Thu May 13, 2010 11:03 pm
Location: North Wales

Re: MOT question

Postby dodgy01 » Thu Sep 30, 2010 8:16 pm

if it is with 30cm of a pescribed are ie a load sensing valve which is above the rear axle then it is a reason for rejection
as i put in my prevous post
dodgy01
Transit Fanatic
Transit Fanatic
 
Posts: 2332
Joined: Wed Nov 04, 2009 8:32 pm
Location: braintree essex

Re: MOT question

Postby Mikey B » Thu Sep 30, 2010 8:32 pm

Not going to argue with someone over the internet grow up lol. No one can say if its a fail or not without seeing it..
MKB Autos All makes and models catered for.
Mikey B
Ford Technician
 
Posts: 517
Joined: Thu May 13, 2010 11:03 pm
Location: North Wales

Re: MOT question

Postby Guy88 » Thu Sep 30, 2010 8:44 pm

got an advisory for the sill, no mention about the floor, pics soon :D
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44

REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD

LIVIN' LOUD
User avatar
Guy88
Site Moderator
 
Posts: 17042
Joined: Wed Mar 29, 2006 10:37 pm
Location: Banbury, oxon

Re: MOT question

Postby dodgy01 » Thu Sep 30, 2010 9:07 pm

top banana

worth doing tho
dodgy01
Transit Fanatic
Transit Fanatic
 
Posts: 2332
Joined: Wed Nov 04, 2009 8:32 pm
Location: braintree essex

Re: MOT question

Postby Guy88 » Sat Oct 02, 2010 6:54 pm

the areas im confused about

Image

Image

Image

Failed on rear cross member and rear brakes
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44

REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD

LIVIN' LOUD
User avatar
Guy88
Site Moderator
 
Posts: 17042
Joined: Wed Mar 29, 2006 10:37 pm
Location: Banbury, oxon

Next

Return to Technical Problems & Questions



Who is online

Users browsing this forum: Majestic-12 [Bot]

This site contains affiliate links for which we may be compensated.