Various Mk3, Mk4 & mk5 parts

[Ian1]

Hi,
I'm after the rail that fits on the bottom of the front windows and the small nylon block that slides along inside. Mine has rusted and worn so can't open the window. I think driver and passenger windows are the same.
Cheers,
Ian

[Nomolos]

Hello there, i am looking for a rear 3 leaf, leaf spring for a Mk3 Transit SWB on a 99 plate, any idea how much with postige to CF33 Bridgend?

Best Regards

Andrew

[trippydog]

Andrew - sorry can't help you on that mate.

Ian - pretty sure I don't have those bits but will have a good look for you tomo.

[transit dave]

Have you got a cup holder and an aerial for a semi high roof just the mast???

Thanks Dave 07807 979 973

[trippydog]

Have you got a cup holder and an aerial for a semi high roof just the mast???

Thanks Dave 07807 979 973

No I don't, sorry.

[County4x4]

Hey Si,
What have you got in the way of Front Door Locks/Catches for my Mk3 doors? i don't need the barrels just the mech as all the placky insulation has gone to the dogs and only work with a continuous supply of WD . . . . .

Do you know how late a model lock will still fit in a mk3? Or am i stuck with originals . . . . .?

Thanx,
Andi

[MinorMatt]

i dont suppose you have a water pump pulley for a 2.5 di spare?

[madbri]

i dont suppose you have a water pump pulley for a 2.5 di spare?

mat ive got 1 if all else false

[MinorMatt]

Scrub that - its the oil pump pulley and a set of push rods I need

[trippydog]

Scrub that - its the oil pump pulley and a set of push rods I need

Got a set of push rods and some pulleys - not sure which ones though. Hopefully should be able to find out later today.

Andi - I have some mk3 barrels but I think the only front door mechanisms I have are mk4, not sure if they'd fit. If you are local you are welcome to come over and have a look.

Cheers.

[County4x4]

Thanx Si,
i'm not exactly local(Brighton) but i sometimes pass that way, so, i'll let you know if i am in the area. Are the mechs still attached to the doors? Meanwhile i'll post a Q for the knowledgeable bods in the tech threads to see what fits.

Andi

[trippydog]

Thanx Si,
i'm not exactly local(Brighton) but i sometimes pass that way, so, i'll let you know if i am in the area. Are the mechs still attached to the doors? Meanwhile i'll post a Q for the knowledgeable bods in the tech threads to see what fits.

Andi

Ok, no problem. They aren't attached to the doors.

[MinorMatt]

Whereas I am only a few miles away and I go to Haywards Heath every weekend - i could get them there if it helps

[new2transit]

Hi,

Bit late to this posting but would you happen to have a MK5 steering wheel in decent condition? Also after the instrument panel (and all clocks) for 2000 MK5 smiley?

Cheers

[trippydog]

Hi,

Bit late to this posting but would you happen to have a MK5 steering wheel in decent condition? Also after the instrument panel (and all clocks) for 2000 MK5 smiley?

Cheers

Hi mate.

I've got a steering wheel but think it's from a mk4... not sure if it changed on a mk5. Definitely have some mk5 clocks (without rev counters), might have the surrounding plastics but don't have any full dash's left.

Will have a look for you tomorrow and let you know.

Cheers.