*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


accelerator pedal

Transit Mk3, 4 & 5(smiley front) Forum. All Transits 1986 - 2000

accelerator pedal

Postby jonnyshag » Sat Aug 19, 2006 11:53 am

my accelerattor pedel seems to be very sencetive and i cant hold a steady speed without it jurking the van , if i keep the pedal still sometimes the power would go under or over, its really hard to keep a steady speed even in traffic, anyone know whats wrong here???

my van is Sreg TD
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby rover » Sat Aug 19, 2006 11:54 am

I assume your has the electronic pedal, so I would say the pedal itself is kaput :(

Rover.
Last edited by rover on Sat Aug 19, 2006 4:04 pm, edited 1 time in total.
User avatar
rover
Transit Extremist
Transit Extremist
 
Posts: 6397
Joined: Mon Nov 21, 2005 12:03 am
Location: Nottinghamshire

Postby 100ps_drw_hicube » Sat Aug 19, 2006 12:31 pm

sounds normal for a epic :? everyone i drove was like that mine is similar too :) try another pedal but tbh i dont think it will cure it :(
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby 100ps_drw_hicube » Sat Aug 19, 2006 12:32 pm

is it hunting at all :? :? if so its more likely to be the pump :wink:
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby jonnyshag » Sat Aug 19, 2006 1:09 pm

no , its just like ive put my foot down or taken it off but ive kept my foot at the same postion

sorry what does tbh mean
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby MarkM » Sat Aug 19, 2006 1:18 pm

jonnyshag wrote:sorry what does tbh mean


To Be Honest

And 100 ps has a pedal unit for sale ;)
Last edited by MarkM on Sat Aug 19, 2006 1:19 pm, edited 1 time in total.
User avatar
MarkM
Transit Fanatic
Transit Fanatic
 
Posts: 2576
Joined: Mon Jan 30, 2006 12:35 pm
Location: Essex

Postby 100ps_drw_hicube » Sat Aug 19, 2006 1:19 pm

oh :roll: thats the switch part take it off clean it up tighten it up should solve it :wink:

to be honest :)
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby jonnyshag » Sat Aug 19, 2006 1:23 pm

100ps_drw_hicube wrote:oh :roll: thats the switch part take it off clean it up tighten it up should solve it :wink:

to be honest :)


you mean take it apart and clean it :?
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby 100ps_drw_hicube » Sat Aug 19, 2006 1:55 pm

yes :D and i have a pedal unit for sale but what year is yours :?
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby jonnyshag » Sat Aug 19, 2006 2:00 pm

mines Sreg 98 there is a little labal on the pedal unit:

97vb 98743 bc
w235x
16.07.05
00238742
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby 100ps_drw_hicube » Sat Aug 19, 2006 3:37 pm

:( :( bugger my stock of spare pedal units are 95's :( :( :( i will have a look and double check but im sure i got rid of my last 97 one :( :(
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby jonnyshag » Sat Aug 19, 2006 3:59 pm

ive taken the pedal off and the regulatar is sealed ,so ive put it back together and not it wont rev and the engine light is on
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby 100ps_drw_hicube » Sat Aug 19, 2006 4:02 pm

:? :? strange usually you can clean em out and sort em :? :? dont know why the light is on tho :? :?
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby jonnyshag » Sat Aug 19, 2006 4:14 pm

you do mean the cleaning the regulater out cos thats a sealed unit, you cant get in it without breaking it
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby 100ps_drw_hicube » Sat Aug 19, 2006 4:24 pm

:? :? no theres a switch thingy hard to describe but clean that out with an airline then tighten the top pedal pivot up so theres no sideways play also clean all the pins /connections where the plugs plug into
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Next

Return to Mk 3, 4 & 5 - Second Generation Transits



Who is online

Users browsing this forum: Google [Bot]

This site contains affiliate links for which we may be compensated.