*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


accelerator pedal

Transit Mk3, 4 & 5(smiley front) Forum. All Transits 1986 - 2000

Postby jonnyshag » Sun Aug 20, 2006 9:26 pm

its strange how it was working then after i dis-connect and re-connect it just gave up , LDV turbo transit powerd use the same pedal too
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby AndyG » Sun Aug 20, 2006 9:31 pm

Yeah :!: I think you're right :!: Good thinking :idea: :D
Image
Ford Transit 120 TDI EPIC Automatic. 0-60 in a leisurely and smooth 12.7 seconds and 1/4 mile in 19.1 seconds. Now where's all these faster? manual Di s?
User avatar
AndyG
Site Admin
 
Posts: 27833
Joined: Sun Mar 12, 2006 1:14 am
Location: West London

Postby jonnyshag » Sun Aug 20, 2006 9:50 pm

ring around time tomorrow then :(
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby AndyG » Mon Aug 21, 2006 10:22 pm

Any luck :!: :?:
Image
Ford Transit 120 TDI EPIC Automatic. 0-60 in a leisurely and smooth 12.7 seconds and 1/4 mile in 19.1 seconds. Now where's all these faster? manual Di s?
User avatar
AndyG
Site Admin
 
Posts: 27833
Joined: Sun Mar 12, 2006 1:14 am
Location: West London

Postby jonnyshag » Tue Aug 22, 2006 8:10 pm

got a pedal today , just try it , still not reving :x
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby 100ps_drw_hicube » Tue Aug 22, 2006 10:26 pm

:cry: :cry: :cry: ecu then or better still get it plugged in :) new pedal??? if not was it a working pedal?? :? :?
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby AndyG » Tue Aug 22, 2006 11:28 pm

jonnyshag wrote:got a pedal today , just try it , still not reving :x
Nah :!: Nah :!: Nah :!:

jonnyshag I can tell you from experience it will be your chip :!: :wink:

Switch it off and try again :idea:

It'll probably need turning down just a tadge :!: :D :lol:
Image
Ford Transit 120 TDI EPIC Automatic. 0-60 in a leisurely and smooth 12.7 seconds and 1/4 mile in 19.1 seconds. Now where's all these faster? manual Di s?
User avatar
AndyG
Site Admin
 
Posts: 27833
Joined: Sun Mar 12, 2006 1:14 am
Location: West London

Postby jonnyshag » Thu Aug 24, 2006 7:33 pm

Andyg wrote:
jonnyshag wrote:got a pedal today , just try it , still not reving :x
Nah :!: Nah :!: Nah :!:

jonnyshag I can tell you from experience it will be your chip :!: :wink:

Switch it off and try again :idea:

It'll probably need turning down just a tadge :!: :D :lol:


what do you mean?
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby jonnyshag » Fri Aug 25, 2006 7:04 pm

i just been having another look at this pedal , if i put the pedal half way down then start it , it will rev and then i can rev it up and down , but if i let it right off it will stop working and wont rev again , ive got it booked in with lucas on wednesday
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby jonnyshag » Tue Aug 29, 2006 5:36 pm

ok just had a guy from lucus down to look at my van , he pluged his computer reader in and came up with about 10 different codes relating to the pedal , he cleard them all and then started engine to find 3 codes coming up on the reader , theres permentley a fault cos the same 3 codes come up after clearing them which all relate to the pedal , the only thing we can think of is that theres a break in the wires or what are the chances of 2 pedals being faulty
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby jonnyshag » Wed Aug 30, 2006 8:30 pm

hey pestro , susted the pedel , the regulater on the pedal as 2 nuts which if there undone the regulater wil spin round by about 5mm , if its too far forward , it triggers the ECU so it just needs to come back about 2mm
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby 100ps_drw_hicube » Wed Aug 30, 2006 9:14 pm

good 8)
You only need two tools in life: WD-40 and Duct Tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the duct tape.
User avatar
100ps_drw_hicube
Transit Abuser!!
 
Posts: 4118
Joined: Tue Sep 06, 2005 6:25 pm
Location: sussex

Postby Guy88 » Wed Aug 30, 2006 9:16 pm

Good to here theres some progress mate 8) 8)
2005 Ford F250 Super Duty
1992 MK3 ambulance
1980 A Series crew cab
1984 A series RB44

REMAPPED BY http://WWW.VANTUNER.COM HE IS THE WAY FORWARD

LIVIN' LOUD
User avatar
Guy88
Site Moderator
 
Posts: 17042
Joined: Wed Mar 29, 2006 10:37 pm
Location: Banbury, oxon

Postby jonnyshag » Wed Aug 30, 2006 9:58 pm

i just tested the pedel , will have to fit it back on tomorrow when its a bit light and give a road test
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

Postby jonnyshag » Sat Sep 02, 2006 7:22 pm

Back on the road :lol: :lol:
User avatar
jonnyshag
Transit Devotee
Transit Devotee
 
Posts: 564
Joined: Mon Jul 11, 2005 8:52 pm
Location: hull

PreviousNext

Return to Mk 3, 4 & 5 - Second Generation Transits



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.